From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- .../devicetree/bindings/extcon/extcon-max3355.txt | 21 ++++ .../devicetree/bindings/extcon/extcon-palmas.txt | 22 ++++ .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 76 +++++++++++++ .../bindings/extcon/extcon-usbc-cros-ec.yaml | 55 +++++++++ .../bindings/extcon/extcon-usbc-tusb320.yaml | 43 +++++++ .../devicetree/bindings/extcon/fcs,fsa880.yaml | 52 +++++++++ .../bindings/extcon/linux,extcon-usb-gpio.yaml | 43 +++++++ .../devicetree/bindings/extcon/maxim,max14526.yaml | 80 +++++++++++++ .../devicetree/bindings/extcon/maxim,max77843.yaml | 41 +++++++ .../bindings/extcon/qcom,pm8941-misc.yaml | 66 +++++++++++ .../bindings/extcon/richtek,rt8973a-muic.yaml | 49 ++++++++ .../bindings/extcon/samsung,s2mu005-muic.yaml | 40 +++++++ .../bindings/extcon/siliconmitus,sm5502-muic.yaml | 57 ++++++++++ .../devicetree/bindings/extcon/wlf,arizona.yaml | 126 +++++++++++++++++++++ 14 files changed, 771 insertions(+) create mode 100644 Documentation/devicetree/bindings/extcon/extcon-max3355.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-palmas.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml create mode 100644 Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml create mode 100644 Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml create mode 100644 Documentation/devicetree/bindings/extcon/maxim,max14526.yaml create mode 100644 Documentation/devicetree/bindings/extcon/maxim,max77843.yaml create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml create mode 100644 Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml create mode 100644 Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml create mode 100644 Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml create mode 100644 Documentation/devicetree/bindings/extcon/wlf,arizona.yaml (limited to 'Documentation/devicetree/bindings/extcon') diff --git a/Documentation/devicetree/bindings/extcon/extcon-max3355.txt b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt new file mode 100644 index 000000000..f2288ea9e --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt @@ -0,0 +1,21 @@ +Maxim Integrated MAX3355 USB OTG chip +------------------------------------- + +MAX3355 integrates a charge pump and comparators to enable a system with an +integrated USB OTG dual-role transceiver to function as a USB OTG dual-role +device. + +Required properties: +- compatible: should be "maxim,max3355"; +- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's SHDN# pin; +- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's ID_OUT pin. + +Example: + + usb-otg { + compatible = "maxim,max3355"; + maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt new file mode 100644 index 000000000..f61d5af44 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -0,0 +1,22 @@ +EXTCON FOR PALMAS/TWL CHIPS + +PALMAS USB COMPARATOR +Required Properties: + - compatible: should contain one of: + * "ti,palmas-usb-vid". + * "ti,twl6035-usb-vid". + * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid"). + * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid"). + +Optional Properties: + - ti,wakeup : To enable the wakeup comparator in probe + - ti,enable-id-detection: Perform ID detection. If id-gpio is specified + it performs id-detection using GPIO else using OTG core. + - ti,enable-vbus-detection: Perform VBUS detection. + - id-gpio: gpio for GPIO ID detection. See gpio binding. + - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds. + +palmas-usb { + compatible = "ti,twl6035-usb", "ti,palmas-usb"; + ti,wakeup; +}; diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml new file mode 100644 index 000000000..79f88b5f4 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PTN5150 CC (Configuration Channel) Logic device + +maintainers: + - Krzysztof Kozlowski + +description: | + PTN5150 is a small thin low power CC logic chip supporting the USB Type-C + connector application with CC control logic detection and indication + functions. It is interfaced to the host controller using an I2C interface. + +properties: + compatible: + const: nxp,ptn5150 + + int-gpios: + maxItems: 1 + deprecated: true + description: + GPIO pin (input) connected to the PTN5150's INTB pin. + Use "interrupts" instead. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + vbus-gpios: + maxItems: 1 + description: + GPIO pin (output) used to control VBUS. If skipped, no such control + takes place. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the usb controller for the dual role switch. + + connector: + $ref: /schemas/connector/usb-connector.yaml# + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ptn5150@1d { + compatible = "nxp,ptn5150"; + reg = <0x1d>; + interrupt-parent = <&msmgpio>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; + vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + + port { + endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml new file mode 100644 index 000000000..e00c8072b --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC USB Type-C cable and accessories detection + +maintainers: + - Benson Leung + +description: | + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is + able to detect the state of external accessories such as display adapters + or USB devices when said accessories are attached or detached. + The node for this device must be under a cros-ec node like google,cros-ec-spi + or google,cros-ec-i2c. + +properties: + compatible: + const: google,extcon-usbc-cros-ec + + google,usb-port-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the port id + minimum: 0 + maximum: 255 + +required: + - compatible + - google,usb-port-id + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts = <44 0>; + + usbc_extcon0: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + + usbc_extcon1: extcon1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml new file mode 100644 index 000000000..126107dd5 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usbc-tusb320.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TUSB320 USB Type-C CC Logic controller + +maintainers: + - Michael Auchter + +properties: + compatible: + enum: + - ti,tusb320 + - ti,tusb320l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + tusb320@61 { + compatible = "ti,tusb320"; + reg = <0x61>; + interrupt-parent = <&gpio>; + interrupts = <27 1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml new file mode 100644 index 000000000..bff3fd5f7 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fairchild Semiconductor FSA880, FSA9480 and compatibles + +maintainers: + - Linus Walleij + +description: + The FSA880 and FSA9480 are USB port accessory detectors and switches. + The switch is fully controlled using I2C and enables USB data, stereo + and mono audio, video, microphone, and UART data to use a common + connector port. Compatible switches exist from other manufacturers. + +properties: + compatible: + enum: + - fcs,fsa880 + - fcs,fsa9480 + - ti,tsu6111 + + reg: + maxItems: 1 + description: The I2C address for an FSA880 compatible device is + usually 0x25. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + usb-switch@25 { + compatible = "fcs,fsa880"; + reg = <0x25>; + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml new file mode 100644 index 000000000..8f29d3336 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB GPIO Extcon device + +maintainers: + - Frank Li + +description: + This is a virtual device used to generate USB cable states from the USB ID pin + connected to a GPIO pin. + +properties: + compatible: + const: linux,extcon-usb-gpio + + id-gpios: + description: gpio for USB ID pin. See gpio binding. + vbus-gpios: + description: gpio for USB VBUS pin. + +required: + - compatible + +anyOf: + - required: + - id-gpios + - required: + - vbus-gpios + +additionalProperties: false + +examples: + - | + #include + + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml b/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml new file mode 100644 index 000000000..7eb5918df --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/maxim,max14526.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14526 MicroUSB Integrated Circuit (MUIC) + +maintainers: + - Svyatoslav Ryhel + +properties: + compatible: + const: maxim,max14526 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - connector + - port + +unevaluatedProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + muic@44 { + compatible = "maxim,max14526"; + reg = <0x44>; + + interrupt-parent = <&gpio>; + interrupts = <72 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + + port { + #address-cells = <1>; + #size-cells = <0>; + + muic_to_charger: endpoint@0 { + reg = <0>; + remote-endpoint = <&charger_input>; + }; + + muic_to_usb: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_input>; + }; + + muic_to_mhl: endpoint@2 { + reg = <2>; + remote-endpoint = <&mhl_input>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml new file mode 100644 index 000000000..55800fb02 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Any connector to the data bus of this controller should be modelled using + the OF graph bindings specified + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - connector + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml new file mode 100644 index 000000000..6b80518cb --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device + +maintainers: + - Guru Das Srinagesh + +description: | + Some Qualcomm PMICs have a "misc" module that can be used to detect when + the USB ID pin has been pulled low or high. + +properties: + compatible: + items: + - const: qcom,pm8941-misc + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + anyOf: + - items: + - const: usb_id + - const: usb_vbus + - items: + - const: usb_id + - items: + - const: usb_vbus +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include + + pmic { + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + usb_id: usb-detect@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + }; + + usb-controller { + extcon = <&usb_id>; + }; diff --git a/Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml b/Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml new file mode 100644 index 000000000..f9e0d816c --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/richtek,rt8973a-muic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT8973A MUIC + +maintainers: + - Chanwoo Choi + +description: + The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A + is a USB port accessory detector and switch that is optimized to protect low + voltage system from abnormal high input voltage (up to 28V) and supports high + speed USB operation. Also, RT8973A support 'auto-configuration' mode. + If auto-configuration mode is enabled, RT8973A would control internal h/w patch + for USB D-/D+ switching. + +properties: + compatible: + const: richtek,rt8973a-muic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + usb-switch@14 { + compatible = "richtek,rt8973a-muic"; + reg = <0x14>; + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml b/Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml new file mode 100644 index 000000000..0a320d5e2 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/samsung,s2mu005-muic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MUIC Device for Samsung S2M series PMICs + +maintainers: + - Kaustabh Chakraborty + +description: | + The Samsung S2M series PMIC MUIC device is a USB port accessory + detector. It reports multiple states depending on the ID-GND + resistance measured by an internal ADC. + + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +properties: + compatible: + enum: + - samsung,s2mu005-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Port connecting to the USB controller or PHY. + +required: + - compatible + - connector + - port + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml new file mode 100644 index 000000000..7ef2d9bef --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device + +maintainers: + - Chanwoo Choi + +description: + The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device + which can detect the state of external accessory when external accessory is + attached or detached and button is pressed or released. It is interfaced to + the host controller using an I2C interface. + +properties: + compatible: + enum: + - siliconmitus,sm5502-muic + - siliconmitus,sm5504-muic + - siliconmitus,sm5703-muic + + reg: + maxItems: 1 + description: I2C slave address of the device. Usually 0x25 for SM5502 + and SM5703, 0x14 for SM5504. + + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml new file mode 100644 index 000000000..351b202d0 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + + This document lists Extcon specific bindings, see the primary binding + document ../mfd/arizona.yaml + +properties: + wlf,hpdet-channel: + description: + Headphone detection channel. ARIZONA_ACCDET_MODE_HPL/1 sets the + headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it + to HPDETR. If this node is not included or if the value is unknown, + then headphone detection mode is set to HPDETL. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 2 + + wlf,use-jd2: + description: + Use the additional JD input along with JD1 for dual pin jack detection. + type: boolean + + wlf,use-jd2-nopull: + description: + Internal pull on JD2 is disabled when used for jack detection. + type: boolean + + wlf,jd-invert: + description: + Invert the polarity of the jack detection switch. + type: boolean + + wlf,micd-software-compare: + description: + Use a software comparison to determine mic presence. + type: boolean + + wlf,micd-detect-debounce: + description: + Additional software microphone detection debounce specified in + milliseconds. + $ref: /schemas/types.yaml#/definitions/uint32 + + wlf,micd-pol-gpio: + description: + GPIO specifier for the GPIO controlling the headset polarity if one + exists. + maxItems: 1 + + wlf,micd-bias-start-time: + description: + Time allowed for MICBIAS to startup prior to performing microphone + detection, specified as per the ARIZONA_MICD_TIME_XXX defines. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 12 + + wlf,micd-rate: + description: + Delay between successive microphone detection measurements, specified + as per the ARIZONA_MICD_TIME_XXX defines. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 12 + + wlf,micd-dbtime: + description: + Microphone detection hardware debounces specified as the number of + measurements to take. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + + wlf,micd-timeout-ms: + description: + Timeout for microphone detection, specified in milliseconds. + + wlf,micd-force-micbias: + description: + Force MICBIAS continuously on during microphone detection. + type: boolean + + wlf,micd-configs: + description: + Headset polarity configurations (generally used for detection of + CTIA / OMTP headsets), the field can be of variable length but + should always be a multiple of 3 cells long, each three cell group + represents one polarity configuration. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: + The first cell defines the accessory detection pin, zero + will use MICDET1 and 0x2000 will use MICDET2. + enum: [ 0, 0x2000 ] + - description: + The second cell represents the MICBIAS to be used. Zero + will use MICVDD, 1-3 will use MICBIASx. + minimum: 0 + maximum: 3 + - description: + The third cell represents the value of the micd-pol-gpio + pin. + minimum: 0 + maximum: 1 + + wlf,gpsw: + description: + Settings for the general purpose switch, set as one of the + ARIZONA_GPSW_XXX defines. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + +additionalProperties: true -- cgit v1.3.1