From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- .../embedded-controller/acer,aspire1-ec.yaml | 60 ++++ .../embedded-controller/google,cros-ec.yaml | 326 +++++++++++++++++++++ .../bindings/embedded-controller/gw,gsc.yaml | 193 ++++++++++++ .../embedded-controller/huawei,gaokun3-ec.yaml | 124 ++++++++ .../embedded-controller/kontron,sl28cpld.yaml | 153 ++++++++++ .../lenovo,thinkpad-t14s-ec.yaml | 50 ++++ .../embedded-controller/lenovo,yoga-c630-ec.yaml | 83 ++++++ .../microsoft,surface-rt-ec.yaml | 63 ++++ .../embedded-controller/microsoft,surface-sam.yaml | 47 +++ .../embedded-controller/qcom,hamoa-crd-ec.yaml | 56 ++++ .../traverse,ten64-controller.yaml | 40 +++ 11 files changed, 1195 insertions(+) create mode 100644 Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/microsoft,surface-rt-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/qcom,hamoa-crd-ec.yaml create mode 100644 Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml (limited to 'Documentation/devicetree/bindings/embedded-controller') diff --git a/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml new file mode 100644 index 000000000..01ee61768 --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/acer,aspire1-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Acer Aspire 1 Embedded Controller + +maintainers: + - Nikita Travkin + +description: + The Acer Aspire 1 laptop uses an embedded controller to control battery + and charging as well as to provide a set of misc features such as the + laptop lid status and HPD events for the USB Type-C DP alt mode. + +properties: + compatible: + const: acer,aspire1-ec + + reg: + const: 0x76 + + interrupts: + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@76 { + compatible = "acer,aspire1-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + + port { + ec_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml new file mode 100644 index 000000000..3ab5737c9 --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml @@ -0,0 +1,326 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/google,cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS Embedded Controller + +maintainers: + - Benson Leung + - Guenter Roeck + +description: + Google's ChromeOS EC is a microcontroller which talks to the AP and + implements various functions such as keyboard and battery charging. + The EC can be connected through various interfaces (I2C, SPI, and others) + and the compatible string specifies which interface is being used. + +properties: + compatible: + oneOf: + - description: + For implementations of the EC connected through I2C. + const: google,cros-ec-i2c + - description: + For implementations of the EC connected through SPI. + const: google,cros-ec-spi + - description: + For implementations of the FPMCU connected through SPI. + items: + - const: google,cros-ec-fp + - const: google,cros-ec-spi + - description: + For implementations of the EC connected through RPMSG. + const: google,cros-ec-rpmsg + - description: + For implementations of the EC connected through UART. + const: google,cros-ec-uart + + controller-data: true + + google,cros-ec-spi-pre-delay: + description: + This property specifies the delay in usecs between the + assertion of the CS and the first clock pulse. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + google,cros-ec-spi-msg-delay: + description: + This property specifies the delay in usecs between messages. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + google,has-vbc-nvram: + description: + Some implementations of the EC include a small nvram space used to + store verified boot context data. This boolean flag is used to specify + whether this nvram is present or not. + type: boolean + + mediatek,rpmsg-name: + description: + Must be defined if the cros-ec is a rpmsg device for a Mediatek + ARM Cortex M4 Co-processor. Contains the name of the rpmsg + device. Used to match the subnode to the rpmsg device announced by + the SCP. + $ref: /schemas/types.yaml#/definitions/string + + spi-max-frequency: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + boot0-gpios: + maxItems: 1 + description: Assert for bootloader mode. + + vdd-supply: true + + wakeup-source: + description: Button can wake-up the system. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + typec: + $ref: /schemas/chrome/google,cros-ec-typec.yaml# + + ec-pwm: + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# + deprecated: true + + pwm: + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# + + keyboard-controller: + $ref: /schemas/input/google,cros-ec-keyb.yaml# + + proximity: + $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml# + + codecs: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + patternProperties: + "^ec-codec@[a-f0-9]+$": + type: object + $ref: /schemas/sound/google,cros-ec-codec.yaml# + + required: + - "#address-cells" + - "#size-cells" + + cbas: + type: object + + description: + This device is used to signal when a detachable base is attached + to a Chrome OS tablet. This device cannot be detected at runtime. + + properties: + compatible: + const: google,cros-cbas + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^i2c-tunnel[0-9]*$": + type: object + $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml# + + "^regulator@[0-9]+$": + type: object + $ref: /schemas/regulator/google,cros-ec-regulator.yaml# + + "^extcon[0-9]*$": + type: object + $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml# + +required: + - compatible + +allOf: + - if: + properties: + compatible: + not: + contains: + const: google,cros-ec-spi + then: + properties: + controller-data: false + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + else: + $ref: /schemas/spi/spi-peripheral-props.yaml + + - if: + properties: + compatible: + not: + contains: + const: google,cros-ec-rpmsg + then: + properties: + mediatek,rpmsg-name: false + + - if: + properties: + compatible: + not: + contains: + enum: + - google,cros-ec-rpmsg + - google,cros-ec-uart + then: + required: + - reg + - interrupts + + - if: + properties: + compatible: + contains: + const: google,cros-ec-fp + then: + properties: + '#address-cells': false + '#size-cells': false + typec: false + ec-pwm: false + kbd-led-backlight: false + keyboard-controller: false + proximity: false + codecs: false + cbas: false + + patternProperties: + "^i2c-tunnel[0-9]*$": false + "^regulator@[0-9]+$": false + "^extcon[0-9]*$": false + + # Using additionalProperties: false here and + # listing true properties doesn't work + + required: + - reset-gpios + - boot0-gpios + - vdd-supply + else: + properties: + reset-gpios: false + boot0-gpios: false + vdd-supply: false + +additionalProperties: false + +examples: + # Example for I2C + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpio0>; + }; + }; + + # Example for SPI + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + google,cros-ec-spi-msg-delay = <30>; + google,cros-ec-spi-pre-delay = <10>; + interrupts = <99 0>; + interrupt-parent = <&gpio7>; + spi-max-frequency = <5000000>; + #gpio-cells = <2>; + gpio-controller; + + proximity { + compatible = "google,cros-ec-mkbp-proximity"; + }; + + cbas { + compatible = "google,cros-cbas"; + }; + }; + }; + + # Example for RPMSG + - | + scp0 { + cros-ec { + compatible = "google,cros-ec-rpmsg"; + }; + }; + + # Example for FPMCU + - | + spi { + #address-cells = <0x1>; + #size-cells = <0x0>; + + ec@0 { + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; + reg = <0x0>; + interrupt-parent = <&gpio_controller>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <3000000>; + reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>; + boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>; + vdd-supply = <&pp3300_fp_mcu>; + }; + }; + + # Example for UART + - | + serial { + cros-ec { + compatible = "google,cros-ec-uart"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml b/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml new file mode 100644 index 000000000..82d4b2dad --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/gw,gsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gateworks System Controller + +description: | + The Gateworks System Controller (GSC) is a device present across various + Gateworks product families that provides a set of system related features + such as the following (refer to the board hardware user manuals to see what + features are present) + - Watchdog Timer + - GPIO + - Pushbutton controller + - Hardware monitor with ADC's for temperature and voltage rails and + fan controller + +maintainers: + - Tim Harvey + +properties: + $nodename: + pattern: "gsc@[0-9a-f]{1,2}" + compatible: + const: gw,gsc + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + adc: + type: object + additionalProperties: false + description: Optional hardware monitoring module + + properties: + compatible: + const: gw,gsc-adc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + additionalProperties: false + description: | + Properties for a single ADC which can report cooked values + (i.e. temperature sensor based on thermister), raw values + (i.e. voltage rail with a pre-scaling resistor divider). + + properties: + reg: + description: Register of the ADC + maxItems: 1 + + label: + description: Name of the ADC input + + gw,mode: + description: | + conversion mode: + 0 - temperature, in C*10 + 1 - pre-scaled 24-bit voltage value + 2 - scaled voltage based on an optional resistor divider + and optional offset + 3 - pre-scaled 16-bit voltage value + 4 - fan tach input to report RPM's + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4] + + gw,voltage-divider-ohms: + description: Values of resistors for divider on raw ADC input + maxItems: 2 + items: + minimum: 1000 + maximum: 1000000 + + gw,voltage-offset-microvolt: + description: | + A positive voltage offset to apply to a raw ADC + (i.e. to compensate for a diode drop). + minimum: 0 + maximum: 1000000 + + required: + - gw,mode + - reg + - label + + required: + - compatible + - "#address-cells" + - "#size-cells" + +patternProperties: + "^fan-controller@[0-9a-f]+$": + type: object + additionalProperties: false + description: Optional fan controller + + properties: + compatible: + const: gw,gsc-fan + + reg: + description: The fan controller base address + maxItems: 1 + + required: + - compatible + - reg + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* A0: Board Temperature */ + reg = <0x00>; + label = "temp"; + gw,mode = <0>; + }; + + channel@2 { /* A1: Input Voltage (raw ADC) */ + reg = <0x02>; + label = "vdd_vin"; + gw,mode = <1>; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@b { /* A2: Battery voltage */ + reg = <0x0b>; + label = "vdd_bat"; + gw,mode = <1>; + }; + }; + + fan-controller@2c { + compatible = "gw,gsc-fan"; + reg = <0x2c>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml new file mode 100644 index 000000000..cd9e65b6c --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/huawei,gaokun3-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Huawei Matebook E Go Embedded Controller + +maintainers: + - Pengyu Luo + +description: + Different from other Qualcomm Snapdragon sc8180x and sc8280xp-based + machines, the Huawei Matebook E Go tablets use embedded controllers + while others use a system called PMIC GLink which handles battery, + UCSI, USB Type-C DP Alt Mode. In addition, Huawei's implementation + also handles additional features, such as charging thresholds, FN + lock, smart charging, tablet lid status, thermal sensors, and more. + +properties: + compatible: + enum: + - huawei,gaokun3-ec + + reg: + const: 0x38 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + +patternProperties: + '^connector@[01]$': + $ref: /schemas/connector/usb-connector.yaml# + + properties: + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@38 { + compatible = "huawei,gaokun3-ec"; + reg = <0x38>; + + interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ucsi0_ss_in: endpoint { + remote-endpoint = <&usb_0_qmpphy_out>; + }; + }; + + port@1 { + reg = <1>; + + ucsi0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ucsi1_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@1 { + reg = <1>; + + ucsi1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml new file mode 100644 index 000000000..0b752f3ba --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/kontron,sl28cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kontron's sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a + GPIO controller. + +properties: + compatible: + const: kontron,sl28cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml + + "^hwmon(@[0-9a-f]+)?$": + $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml + + "^interrupt-controller(@[0-9a-f]+)?$": + $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml + + "^pwm(@[0-9a-f]+)?$": + $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml + + "^watchdog(@[0-9a-f]+)?$": + $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "a", "b", "c"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + }; + + interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml new file mode 100644 index 000000000..c87ccb5b3 --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/lenovo,thinkpad-t14s-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lenovo Thinkpad T14s Embedded Controller + +maintainers: + - Sebastian Reichel + +description: + The Qualcomm Snapdragon-based Lenovo Thinkpad T14s has an Embedded Controller + (EC) which handles things such as keyboard backlight, LEDs or non-standard + keys. + +properties: + compatible: + const: lenovo,thinkpad-t14s-ec + + reg: + const: 0x28 + + interrupts: + maxItems: 1 + + wakeup-source: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - |+ + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@28 { + compatible = "lenovo,thinkpad-t14s-ec"; + reg = <0x28>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; + }; +... diff --git a/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml new file mode 100644 index 000000000..c88fbd6ad --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/lenovo,yoga-c630-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lenovo Yoga C630 Embedded Controller. + +maintainers: + - Bjorn Andersson + +description: + The Qualcomm Snapdragon-based Lenovo Yoga C630 has an Embedded Controller + (EC) which handles things such as battery and USB Type-C. This binding + describes the interface, on an I2C bus, to this EC. + +properties: + compatible: + const: lenovo,yoga-c630-ec + + reg: + const: 0x70 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + +patternProperties: + '^connector@[01]$': + $ref: /schemas/connector/usb-connector.yaml# + + properties: + reg: + maxItems: 1 + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - |+ + #include + i2c { + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@70 { + compatible = "lenovo,yoga-c630-ec"; + reg = <0x70>; + + interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "source"; + data-role = "host"; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "source"; + data-role = "host"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-rt-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-rt-ec.yaml new file mode 100644 index 000000000..0fee574a3 --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-rt-ec.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/microsoft,surface-rt-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsoft Surface RT fuel gauge and charger EC + +maintainers: + - Jonas Schwöbel + - Svyatoslav Ryhel + +description: + An Embedded Controller used in Microsoft Surface RT for monitoring + battery properties and charger status. + +allOf: + - $ref: /schemas/power/supply/power-supply.yaml# + +properties: + compatible: + const: microsoft,surface-rt-ec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + monitored-battery: true + +required: + - compatible + - reg + - interrupts + - enable-gpios + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@a { + compatible = "microsoft,surface-rt-ec"; + reg = <0x0a>; + + interrupt-parent = <&gpio>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&gpio 88 GPIO_ACTIVE_HIGH>; + monitored-battery = <&battery>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml new file mode 100644 index 000000000..9202cfca0 --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/microsoft,surface-sam.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Surface System Aggregator Module (SAM, SSAM) + +maintainers: + - Konrad Dybcio + +description: | + Surface devices use a standardized embedded controller to let the + operating system interface with various hardware functions. The + specific functionalities are modeled as subdevices and matched on + five levels: domain, category, target, instance and function. + +properties: + compatible: + const: microsoft,surface-sam + + interrupts: + maxItems: 1 + + current-speed: true + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - | + #include + uart { + embedded-controller { + compatible = "microsoft,surface-sam"; + + interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>; + + pinctrl-0 = <&ssam_state>; + pinctrl-names = "default"; + + current-speed = <4000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/embedded-controller/qcom,hamoa-crd-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/qcom,hamoa-crd-ec.yaml new file mode 100644 index 000000000..ac5a08f8f --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/qcom,hamoa-crd-ec.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/qcom,hamoa-crd-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Hamoa Embedded Controller + +maintainers: + - Sibi Sankar + - Anvesh Jain P + +description: + Qualcomm Snapdragon based Hamoa/Purwa and Glymur reference devices have an + EC running on different MCU chips. The EC handles things like fan control, + temperature sensors, access to EC internal state changes. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,glymur-crd-ec + - qcom,hamoa-iot-evk-ec + - const: qcom,hamoa-crd-ec + - enum: + - qcom,hamoa-crd-ec + + reg: + const: 0x76 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@76 { + compatible = "qcom,hamoa-crd-ec"; + reg = <0x76>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml b/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml new file mode 100644 index 000000000..08d02c4df --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/traverse,ten64-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Traverse Ten64 board microcontroller + +maintainers: + - Mathew McBride + +description: | + The board microcontroller on the Ten64 board family is responsible for + management of power sources on the board, as well as signalling the SoC + to power on and reset. + +properties: + compatible: + const: traverse,ten64-controller + + reg: + const: 0x7e + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + board-controller@7e { + compatible = "traverse,ten64-controller"; + reg = <0x7e>; + }; + }; -- cgit v1.3.1