From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- .../devicetree/bindings/dpll/dpll-device.yaml | 76 ++++++++++++ .../devicetree/bindings/dpll/dpll-pin.yaml | 58 +++++++++ .../bindings/dpll/microchip,zl30731.yaml | 131 +++++++++++++++++++++ 3 files changed, 265 insertions(+) create mode 100644 Documentation/devicetree/bindings/dpll/dpll-device.yaml create mode 100644 Documentation/devicetree/bindings/dpll/dpll-pin.yaml create mode 100644 Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml (limited to 'Documentation/devicetree/bindings/dpll') diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml new file mode 100644 index 000000000..fb8d7a9a3 --- /dev/null +++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dpll/dpll-device.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Digital Phase-Locked Loop (DPLL) Device + +maintainers: + - Ivan Vecera + +description: + Digital Phase-Locked Loop (DPLL) device is used for precise clock + synchronization in networking and telecom hardware. The device can + have one or more channels (DPLLs) and one or more physical input and + output pins. Each DPLL channel can either produce pulse-per-clock signal + or drive ethernet equipment clock. The type of each channel can be + indicated by dpll-types property. + +properties: + $nodename: + pattern: "^dpll(@.*)?$" + + "#address-cells": + const: 0 + + "#size-cells": + const: 0 + + dpll-types: + description: List of DPLL channel types, one per DPLL instance. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: [pps, eec] + + input-pins: + type: object + description: DPLL input pins + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^pin@[0-9a-f]+$": + $ref: /schemas/dpll/dpll-pin.yaml + unevaluatedProperties: false + + required: + - "#address-cells" + - "#size-cells" + + output-pins: + type: object + description: DPLL output pins + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^pin@[0-9]+$": + $ref: /schemas/dpll/dpll-pin.yaml + unevaluatedProperties: false + + required: + - "#address-cells" + - "#size-cells" + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/dpll/dpll-pin.yaml b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml new file mode 100644 index 000000000..1287a472f --- /dev/null +++ b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DPLL Pin + +maintainers: + - Ivan Vecera + +description: | + The DPLL pin is either a physical input or output pin that is provided + by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by + its physical order number that is stored in reg property and can have + an additional set of properties like supported (allowed) frequencies, + label, type and may support embedded sync. + + Note that the pin in this context has nothing to do with pinctrl. + +properties: + reg: + description: Hardware index of the DPLL pin. + maxItems: 1 + + connection-type: + description: Connection type of the pin + $ref: /schemas/types.yaml#/definitions/string + enum: [ext, gnss, int, mux, synce] + + esync-control: + description: Indicates whether the pin supports embedded sync functionality. + type: boolean + + label: + description: String exposed as the pin board label + $ref: /schemas/types.yaml#/definitions/string + + ref-sync-sources: + description: | + List of phandles to input pins that can serve as the sync source + in a Reference-Sync pair with this pin acting as the clock source. + A Ref-Sync pair consists of a clock reference and a low-frequency + sync signal. The DPLL locks to the clock reference but + phase-aligns to the sync reference. + Only valid for input pins. Each referenced pin must be a + different input pin on the same device. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + + supported-frequencies-hz: + description: List of supported frequencies for this pin, expressed in Hz. + +required: + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml new file mode 100644 index 000000000..fa5a8f8e3 --- /dev/null +++ b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Azurite DPLL device + +maintainers: + - Ivan Vecera + +description: + Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that + provides up to 5 independent DPLL channels, up to 10 differential or + single-ended inputs and 10 differential or 20 single-ended outputs. + These devices support both I2C and SPI interfaces. + +properties: + compatible: + enum: + - microchip,zl30731 + - microchip,zl30732 + - microchip,zl30733 + - microchip,zl30734 + - microchip,zl30735 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/dpll/dpll-device.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dpll@70 { + compatible = "microchip,zl30732"; + reg = <0x70>; + dpll-types = "pps", "eec"; + + input-pins { + #address-cells = <1>; + #size-cells = <0>; + + sync0: pin@0 { /* REF0P - 1 PPS sync source */ + reg = <0>; + connection-type = "ext"; + label = "SMA1"; + supported-frequencies-hz = /bits/ 64 <1>; + }; + + pin@1 { /* REF0N - clock source, can pair with sync0 */ + reg = <1>; + connection-type = "ext"; + label = "SMA2"; + supported-frequencies-hz = /bits/ 64 <10000 10000000>; + ref-sync-sources = <&sync0>; + }; + }; + + output-pins { + #address-cells = <1>; + #size-cells = <0>; + + pin@3 { /* OUT1N */ + reg = <3>; + connection-type = "gnss"; + esync-control; + label = "Output 1"; + supported-frequencies-hz = /bits/ 64 <1 10000>; + }; + }; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dpll@70 { + compatible = "microchip,zl30731"; + reg = <0x70>; + spi-max-frequency = <12500000>; + + dpll-types = "pps"; + + input-pins { + #address-cells = <1>; + #size-cells = <0>; + + sync1: pin@0 { /* REF0P - 1 PPS sync source */ + reg = <0>; + connection-type = "gnss"; + label = "GNSS_1PPS_IN"; + supported-frequencies-hz = /bits/ 64 <1>; + }; + + pin@1 { /* REF0N - clock source */ + reg = <1>; + connection-type = "gnss"; + label = "GNSS_10M_IN"; + supported-frequencies-hz = /bits/ 64 <10000000>; + ref-sync-sources = <&sync1>; + }; + }; + + output-pins { + #address-cells = <1>; + #size-cells = <0>; + + pin@3 { /* OUT1N */ + reg = <3>; + connection-type = "gnss"; + esync-control; + label = "Output 1"; + supported-frequencies-hz = /bits/ 64 <1 10000>; + }; + }; + }; + }; +... -- cgit v1.3.1