From 93de2a6a4b91b72607136dd656edf03fb399d27f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 23 Sep 2026 09:37:21 -0700 Subject: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260923163721.1584779-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- .../devicetree/bindings/dpll/dpll-device.yaml | 76 ++++++++++++ .../devicetree/bindings/dpll/dpll-pin.yaml | 58 +++++++++ .../bindings/dpll/microchip,zl30731.yaml | 138 +++++++++++++++++++++ 3 files changed, 272 insertions(+) create mode 100644 Documentation/devicetree/bindings/dpll/dpll-device.yaml create mode 100644 Documentation/devicetree/bindings/dpll/dpll-pin.yaml create mode 100644 Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml (limited to 'Documentation/devicetree/bindings/dpll') diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml new file mode 100644 index 000000000..fb8d7a9a3 --- /dev/null +++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dpll/dpll-device.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Digital Phase-Locked Loop (DPLL) Device + +maintainers: + - Ivan Vecera + +description: + Digital Phase-Locked Loop (DPLL) device is used for precise clock + synchronization in networking and telecom hardware. The device can + have one or more channels (DPLLs) and one or more physical input and + output pins. Each DPLL channel can either produce pulse-per-clock signal + or drive ethernet equipment clock. The type of each channel can be + indicated by dpll-types property. + +properties: + $nodename: + pattern: "^dpll(@.*)?$" + + "#address-cells": + const: 0 + + "#size-cells": + const: 0 + + dpll-types: + description: List of DPLL channel types, one per DPLL instance. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + items: + enum: [pps, eec] + + input-pins: + type: object + description: DPLL input pins + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^pin@[0-9a-f]+$": + $ref: /schemas/dpll/dpll-pin.yaml + unevaluatedProperties: false + + required: + - "#address-cells" + - "#size-cells" + + output-pins: + type: object + description: DPLL output pins + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^pin@[0-9]+$": + $ref: /schemas/dpll/dpll-pin.yaml + unevaluatedProperties: false + + required: + - "#address-cells" + - "#size-cells" + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/dpll/dpll-pin.yaml b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml new file mode 100644 index 000000000..1287a472f --- /dev/null +++ b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DPLL Pin + +maintainers: + - Ivan Vecera + +description: | + The DPLL pin is either a physical input or output pin that is provided + by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by + its physical order number that is stored in reg property and can have + an additional set of properties like supported (allowed) frequencies, + label, type and may support embedded sync. + + Note that the pin in this context has nothing to do with pinctrl. + +properties: + reg: + description: Hardware index of the DPLL pin. + maxItems: 1 + + connection-type: + description: Connection type of the pin + $ref: /schemas/types.yaml#/definitions/string + enum: [ext, gnss, int, mux, synce] + + esync-control: + description: Indicates whether the pin supports embedded sync functionality. + type: boolean + + label: + description: String exposed as the pin board label + $ref: /schemas/types.yaml#/definitions/string + + ref-sync-sources: + description: | + List of phandles to input pins that can serve as the sync source + in a Reference-Sync pair with this pin acting as the clock source. + A Ref-Sync pair consists of a clock reference and a low-frequency + sync signal. The DPLL locks to the clock reference but + phase-aligns to the sync reference. + Only valid for input pins. Each referenced pin must be a + different input pin on the same device. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + + supported-frequencies-hz: + description: List of supported frequencies for this pin, expressed in Hz. + +required: + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml new file mode 100644 index 000000000..17983e6c3 --- /dev/null +++ b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Azurite DPLL device + +maintainers: + - Ivan Vecera + +description: + Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that + provides up to 5 independent DPLL channels, up to 10 differential or + single-ended inputs and 10 differential or 20 single-ended outputs. + These devices support both I2C and SPI interfaces. + The ZL3064x line card timing ICs share the ZL3073x register map + and are described with a fallback to the register equivalent ZL3073x + part. + +properties: + compatible: + oneOf: + - enum: + - microchip,zl30731 + - microchip,zl30732 + - microchip,zl30733 + - microchip,zl30734 + - microchip,zl30735 + - items: + - const: microchip,zl30643 + - const: microchip,zl30733 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/dpll/dpll-device.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dpll@70 { + compatible = "microchip,zl30732"; + reg = <0x70>; + dpll-types = "pps", "eec"; + + input-pins { + #address-cells = <1>; + #size-cells = <0>; + + sync0: pin@0 { /* REF0P - 1 PPS sync source */ + reg = <0>; + connection-type = "ext"; + label = "SMA1"; + supported-frequencies-hz = /bits/ 64 <1>; + }; + + pin@1 { /* REF0N - clock source, can pair with sync0 */ + reg = <1>; + connection-type = "ext"; + label = "SMA2"; + supported-frequencies-hz = /bits/ 64 <10000 10000000>; + ref-sync-sources = <&sync0>; + }; + }; + + output-pins { + #address-cells = <1>; + #size-cells = <0>; + + pin@3 { /* OUT1N */ + reg = <3>; + connection-type = "gnss"; + esync-control; + label = "Output 1"; + supported-frequencies-hz = /bits/ 64 <1 10000>; + }; + }; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dpll@70 { + compatible = "microchip,zl30731"; + reg = <0x70>; + spi-max-frequency = <12500000>; + + dpll-types = "pps"; + + input-pins { + #address-cells = <1>; + #size-cells = <0>; + + sync1: pin@0 { /* REF0P - 1 PPS sync source */ + reg = <0>; + connection-type = "gnss"; + label = "GNSS_1PPS_IN"; + supported-frequencies-hz = /bits/ 64 <1>; + }; + + pin@1 { /* REF0N - clock source */ + reg = <1>; + connection-type = "gnss"; + label = "GNSS_10M_IN"; + supported-frequencies-hz = /bits/ 64 <10000000>; + ref-sync-sources = <&sync1>; + }; + }; + + output-pins { + #address-cells = <1>; + #size-cells = <0>; + + pin@3 { /* OUT1N */ + reg = <3>; + connection-type = "gnss"; + esync-control; + label = "Output 1"; + supported-frequencies-hz = /bits/ 64 <1 10000>; + }; + }; + }; + }; +... -- cgit v1.3.1