From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/crypto/device_drivers/index.rst | 9 ++++++++ Documentation/crypto/device_drivers/octeontx2.rst | 25 +++++++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 Documentation/crypto/device_drivers/index.rst create mode 100644 Documentation/crypto/device_drivers/octeontx2.rst (limited to 'Documentation/crypto/device_drivers') diff --git a/Documentation/crypto/device_drivers/index.rst b/Documentation/crypto/device_drivers/index.rst new file mode 100644 index 000000000..c81d311ac --- /dev/null +++ b/Documentation/crypto/device_drivers/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Hardware Device Driver Specific Documentation +--------------------------------------------- + +.. toctree:: + :maxdepth: 1 + + octeontx2 diff --git a/Documentation/crypto/device_drivers/octeontx2.rst b/Documentation/crypto/device_drivers/octeontx2.rst new file mode 100644 index 000000000..7e469b173 --- /dev/null +++ b/Documentation/crypto/device_drivers/octeontx2.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +octeontx2 devlink support +========================= + +This document describes the devlink features implemented by the ``octeontx2 CPT`` +device drivers. + +Parameters +========== + +The ``octeontx2`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``t106_mode`` + - u8 + - runtime + - Used to configure CN10KA B0/CN10KB CPT to work as CN10KA A0/A1. -- cgit v1.3.1