From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/bpf/map_devmap.rst | 238 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 Documentation/bpf/map_devmap.rst (limited to 'Documentation/bpf/map_devmap.rst') diff --git a/Documentation/bpf/map_devmap.rst b/Documentation/bpf/map_devmap.rst new file mode 100644 index 000000000..927312c7b --- /dev/null +++ b/Documentation/bpf/map_devmap.rst @@ -0,0 +1,238 @@ +.. SPDX-License-Identifier: GPL-2.0-only +.. Copyright (C) 2022 Red Hat, Inc. + +================================================= +BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_DEVMAP_HASH +================================================= + +.. note:: + - ``BPF_MAP_TYPE_DEVMAP`` was introduced in kernel version 4.14 + - ``BPF_MAP_TYPE_DEVMAP_HASH`` was introduced in kernel version 5.4 + +``BPF_MAP_TYPE_DEVMAP`` and ``BPF_MAP_TYPE_DEVMAP_HASH`` are BPF maps primarily +used as backend maps for the XDP BPF helper call ``bpf_redirect_map()``. +``BPF_MAP_TYPE_DEVMAP`` is backed by an array that uses the key as +the index to lookup a reference to a net device. While ``BPF_MAP_TYPE_DEVMAP_HASH`` +is backed by a hash table that uses a key to lookup a reference to a net device. +The user provides either <``key``/ ``ifindex``> or <``key``/ ``struct bpf_devmap_val``> +pairs to update the maps with new net devices. + +.. note:: + - The key to a hash map doesn't have to be an ``ifindex``. + - While ``BPF_MAP_TYPE_DEVMAP_HASH`` allows for densely packing the net devices + it comes at the cost of a hash of the key when performing a look up. + +The setup and packet enqueue/send code is shared between the two types of +devmap; only the lookup and insertion is different. + +Usage +===== +Kernel BPF +---------- +bpf_redirect_map() +^^^^^^^^^^^^^^^^^^ +.. code-block:: c + + long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags) + +Redirect the packet to the endpoint referenced by ``map`` at index ``key``. +For ``BPF_MAP_TYPE_DEVMAP`` and ``BPF_MAP_TYPE_DEVMAP_HASH`` this map contains +references to net devices (for forwarding packets through other ports). + +The lower two bits of *flags* are used as the return code if the map lookup +fails. This is so that the return value can be one of the XDP program return +codes up to ``XDP_TX``, as chosen by the caller. The higher bits of ``flags`` +can be set to ``BPF_F_BROADCAST`` or ``BPF_F_EXCLUDE_INGRESS`` as defined +below. + +With ``BPF_F_BROADCAST`` the packet will be broadcast to all the interfaces +in the map, with ``BPF_F_EXCLUDE_INGRESS`` the ingress interface will be excluded +from the broadcast. + +.. note:: + - The key is ignored if BPF_F_BROADCAST is set. + - The broadcast feature can also be used to implement multicast forwarding: + simply create multiple DEVMAPs, each one corresponding to a single multicast group. + +This helper will return ``XDP_REDIRECT`` on success, or the value of the two +lower bits of the ``flags`` argument if the map lookup fails. + +More information about redirection can be found :doc:`redirect` + +bpf_map_lookup_elem() +^^^^^^^^^^^^^^^^^^^^^ +.. code-block:: c + + void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) + +Net device entries can be retrieved using the ``bpf_map_lookup_elem()`` +helper. + +User space +---------- +.. note:: + DEVMAP entries can only be updated/deleted from user space and not + from an eBPF program. Trying to call these functions from a kernel eBPF + program will result in the program failing to load and a verifier warning. + +bpf_map_update_elem() +^^^^^^^^^^^^^^^^^^^^^ +.. code-block:: c + + int bpf_map_update_elem(int fd, const void *key, const void *value, __u64 flags); + +Net device entries can be added or updated using the ``bpf_map_update_elem()`` +helper. This helper replaces existing elements atomically. The ``value`` parameter +can be ``struct bpf_devmap_val`` or a simple ``int ifindex`` for backwards +compatibility. + + .. code-block:: c + + struct bpf_devmap_val { + __u32 ifindex; /* device index */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; + }; + +The ``flags`` argument can be one of the following: + - ``BPF_ANY``: Create a new element or update an existing element. + - ``BPF_NOEXIST``: Create a new element only if it did not exist. + - ``BPF_EXIST``: Update an existing element. + +DEVMAPs can associate a program with a device entry by adding a ``bpf_prog.fd`` +to ``struct bpf_devmap_val``. Programs are run after ``XDP_REDIRECT`` and have +access to both Rx device and Tx device. The program associated with the ``fd`` +must have type XDP with expected attach type ``xdp_devmap``. +When a program is associated with a device index, the program is run on an +``XDP_REDIRECT`` and before the buffer is added to the per-cpu queue. Examples +of how to attach/use xdp_devmap progs can be found in the kernel selftests: + +- ``tools/testing/selftests/bpf/prog_tests/xdp_devmap_attach.c`` +- ``tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c`` + +bpf_map_lookup_elem() +^^^^^^^^^^^^^^^^^^^^^ +.. code-block:: c + +.. c:function:: + int bpf_map_lookup_elem(int fd, const void *key, void *value); + +Net device entries can be retrieved using the ``bpf_map_lookup_elem()`` +helper. + +bpf_map_delete_elem() +^^^^^^^^^^^^^^^^^^^^^ +.. code-block:: c + +.. c:function:: + int bpf_map_delete_elem(int fd, const void *key); + +Net device entries can be deleted using the ``bpf_map_delete_elem()`` +helper. This helper will return 0 on success, or negative error in case of +failure. + +Examples +======== + +Kernel BPF +---------- + +The following code snippet shows how to declare a ``BPF_MAP_TYPE_DEVMAP`` +called tx_port. + +.. code-block:: c + + struct { + __uint(type, BPF_MAP_TYPE_DEVMAP); + __type(key, __u32); + __type(value, __u32); + __uint(max_entries, 256); + } tx_port SEC(".maps"); + +The following code snippet shows how to declare a ``BPF_MAP_TYPE_DEVMAP_HASH`` +called forward_map. + +.. code-block:: c + + struct { + __uint(type, BPF_MAP_TYPE_DEVMAP_HASH); + __type(key, __u32); + __type(value, struct bpf_devmap_val); + __uint(max_entries, 32); + } forward_map SEC(".maps"); + +.. note:: + + The value type in the DEVMAP above is a ``struct bpf_devmap_val`` + +The following code snippet shows a simple xdp_redirect_map program. This program +would work with a user space program that populates the devmap ``forward_map`` based +on ingress ifindexes. The BPF program (below) is redirecting packets using the +ingress ``ifindex`` as the ``key``. + +.. code-block:: c + + SEC("xdp") + int xdp_redirect_map_func(struct xdp_md *ctx) + { + int index = ctx->ingress_ifindex; + + return bpf_redirect_map(&forward_map, index, 0); + } + +The following code snippet shows a BPF program that is broadcasting packets to +all the interfaces in the ``tx_port`` devmap. + +.. code-block:: c + + SEC("xdp") + int xdp_redirect_map_func(struct xdp_md *ctx) + { + return bpf_redirect_map(&tx_port, 0, BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS); + } + +User space +---------- + +The following code snippet shows how to update a devmap called ``tx_port``. + +.. code-block:: c + + int update_devmap(int ifindex, int redirect_ifindex) + { + int ret; + + ret = bpf_map_update_elem(bpf_map__fd(tx_port), &ifindex, &redirect_ifindex, 0); + if (ret < 0) { + fprintf(stderr, "Failed to update devmap_ value: %s\n", + strerror(errno)); + } + + return ret; + } + +The following code snippet shows how to update a hash_devmap called ``forward_map``. + +.. code-block:: c + + int update_devmap(int ifindex, int redirect_ifindex) + { + struct bpf_devmap_val devmap_val = { .ifindex = redirect_ifindex }; + int ret; + + ret = bpf_map_update_elem(bpf_map__fd(forward_map), &ifindex, &devmap_val, 0); + if (ret < 0) { + fprintf(stderr, "Failed to update devmap_ value: %s\n", + strerror(errno)); + } + return ret; + } + +References +=========== + +- https://lwn.net/Articles/728146/ +- https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=6f9d451ab1a33728adb72d7ff66a7b374d665176 +- https://elixir.bootlin.com/linux/latest/source/net/core/filter.c#L4106 -- cgit v1.3.1