From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- Documentation/block/pr.rst | 119 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 Documentation/block/pr.rst (limited to 'Documentation/block/pr.rst') diff --git a/Documentation/block/pr.rst b/Documentation/block/pr.rst new file mode 100644 index 000000000..c893d6da8 --- /dev/null +++ b/Documentation/block/pr.rst @@ -0,0 +1,119 @@ +=============================================== +Block layer support for Persistent Reservations +=============================================== + +The Linux kernel supports a user space interface for simplified +Persistent Reservations which map to block devices that support +these (like SCSI). Persistent Reservations allow restricting +access to block devices to specific initiators in a shared storage +setup. + +This document gives a general overview of the support ioctl commands. +For a more detailed reference please refer to the SCSI Primary +Commands standard, specifically the section on Reservations and the +"PERSISTENT RESERVE IN" and "PERSISTENT RESERVE OUT" commands. + +All implementations are expected to ensure the reservations survive +a power loss and cover all connections in a multi path environment. +These behaviors are optional in SPC but will be automatically applied +by Linux. + + +The following types of reservations are supported: +-------------------------------------------------- + + - PR_WRITE_EXCLUSIVE + Only the initiator that owns the reservation can write to the + device. Any initiator can read from the device. + + - PR_EXCLUSIVE_ACCESS + Only the initiator that owns the reservation can access the + device. + + - PR_WRITE_EXCLUSIVE_REG_ONLY + Only initiators with a registered key can write to the device, + Any initiator can read from the device. + + - PR_EXCLUSIVE_ACCESS_REG_ONLY + Only initiators with a registered key can access the device. + + - PR_WRITE_EXCLUSIVE_ALL_REGS + + Only initiators with a registered key can write to the device, + Any initiator can read from the device. + All initiators with a registered key are considered reservation + holders. + Please reference the SPC spec on the meaning of a reservation + holder if you want to use this type. + + - PR_EXCLUSIVE_ACCESS_ALL_REGS + Only initiators with a registered key can access the device. + All initiators with a registered key are considered reservation + holders. + Please reference the SPC spec on the meaning of a reservation + holder if you want to use this type. + + +The following ioctl are supported: +---------------------------------- + +1. IOC_PR_REGISTER +^^^^^^^^^^^^^^^^^^ + +This ioctl command registers a new reservation if the new_key argument +is non-null. If no existing reservation exists old_key must be zero, +if an existing reservation should be replaced old_key must contain +the old reservation key. + +If the new_key argument is 0 it unregisters the existing reservation passed +in old_key. + + +2. IOC_PR_RESERVE +^^^^^^^^^^^^^^^^^ + +This ioctl command reserves the device and thus restricts access for other +devices based on the type argument. The key argument must be the existing +reservation key for the device as acquired by the IOC_PR_REGISTER, +IOC_PR_REGISTER_IGNORE, IOC_PR_PREEMPT or IOC_PR_PREEMPT_ABORT commands. + + +3. IOC_PR_RELEASE +^^^^^^^^^^^^^^^^^ + +This ioctl command releases the reservation specified by key and flags +and thus removes any access restriction implied by it. + + +4. IOC_PR_PREEMPT +^^^^^^^^^^^^^^^^^ + +This ioctl command releases the existing reservation referred to by +old_key and replaces it with a new reservation of type for the +reservation key new_key. + + +5. IOC_PR_PREEMPT_ABORT +^^^^^^^^^^^^^^^^^^^^^^^ + +This ioctl command works like IOC_PR_PREEMPT except that it also aborts +any outstanding command sent over a connection identified by old_key. + +6. IOC_PR_CLEAR +^^^^^^^^^^^^^^^ + +This ioctl command unregisters both key and any other reservation key +registered with the device and drops any existing reservation. + + +Flags +----- + +All the ioctls have a flag field. Currently only one flag is supported: + + - PR_FL_IGNORE_KEY + Ignore the existing reservation key. This is commonly supported for + IOC_PR_REGISTER, and some implementation may support the flag for + IOC_PR_RESERVE. + +For all unknown flags the kernel will return -EOPNOTSUPP. -- cgit v1.3.1