From 4617721c502b2ddaa4e324e86da4997edf738fa5 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 2 Sep 2026 09:55:01 -0400 Subject: ftrace: Synchronize the initialization of ftrace_ops There's some internal state that ftrace_ops needs to have set, but since it can be declared outside of the ftrace.c code, it calls ftrace_ops_init() on the ops in every global function. The issue is that if two tasks call it on the same ops at the same time it is possible to have the initialization of one corrupt the initialization of the other call. Create a ops_mutex to use to synchronize every initialization of the ftrace_ops. The mutex is taken within checking the ftrace_ops flag that states it was initializied but the flag is checked again after the mutex has been taken. Checking first outside the mutex allows it to shortcut having to take the mutex. But then the check needs to be done again after the mute is taken in case of races. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock") Reported-by: sashiko-bot@kernel.org Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/ Signed-off-by: Steven Rostedt --- Documentation/arch/xtensa/atomctl.rst | 51 +++++++++ Documentation/arch/xtensa/booting.rst | 22 ++++ Documentation/arch/xtensa/features.rst | 3 + Documentation/arch/xtensa/index.rst | 14 +++ Documentation/arch/xtensa/mmu.rst | 198 +++++++++++++++++++++++++++++++++ 5 files changed, 288 insertions(+) create mode 100644 Documentation/arch/xtensa/atomctl.rst create mode 100644 Documentation/arch/xtensa/booting.rst create mode 100644 Documentation/arch/xtensa/features.rst create mode 100644 Documentation/arch/xtensa/index.rst create mode 100644 Documentation/arch/xtensa/mmu.rst (limited to 'Documentation/arch/xtensa') diff --git a/Documentation/arch/xtensa/atomctl.rst b/Documentation/arch/xtensa/atomctl.rst new file mode 100644 index 000000000..75d174169 --- /dev/null +++ b/Documentation/arch/xtensa/atomctl.rst @@ -0,0 +1,51 @@ +=========================================== +Atomic Operation Control (ATOMCTL) Register +=========================================== + +We Have Atomic Operation Control (ATOMCTL) Register. +This register determines the effect of using a S32C1I instruction +with various combinations of: + + 1. With and without an Coherent Cache Controller which + can do Atomic Transactions to the memory internally. + + 2. With and without An Intelligent Memory Controller which + can do Atomic Transactions itself. + +The Core comes up with a default value of for the three types of cache ops:: + + 0x28: (WB: Internal, WT: Internal, BY:Exception) + +On the FPGA Cards we typically simulate an Intelligent Memory controller +which can implement RCW transactions. For FPGA cards with an External +Memory controller we let it to the atomic operations internally while +doing a Cached (WB) transaction and use the Memory RCW for un-cached +operations. + +For systems without an coherent cache controller, non-MX, we always +use the memory controllers RCW, though non-MX controllers likely +support the Internal Operation. + +CUSTOMER-WARNING: + Virtually all customers buy their memory controllers from vendors that + don't support atomic RCW memory transactions and will likely want to + configure this register to not use RCW. + +Developers might find using RCW in Bypass mode convenient when testing +with the cache being bypassed; for example studying cache alias problems. + +See Section 4.3.12.4 of ISA; Bits:: + + WB WT BY + 5 4 | 3 2 | 1 0 + +========= ================== ================== =============== + 2 Bit + Field + Values WB - Write Back WT - Write Thru BY - Bypass +========= ================== ================== =============== + 0 Exception Exception Exception + 1 RCW Transaction RCW Transaction RCW Transaction + 2 Internal Operation Internal Operation Reserved + 3 Reserved Reserved Reserved +========= ================== ================== =============== diff --git a/Documentation/arch/xtensa/booting.rst b/Documentation/arch/xtensa/booting.rst new file mode 100644 index 000000000..e1b83707e --- /dev/null +++ b/Documentation/arch/xtensa/booting.rst @@ -0,0 +1,22 @@ +===================================== +Passing boot parameters to the kernel +===================================== + +Boot parameters are represented as a TLV list in the memory. Please see +arch/xtensa/include/asm/bootparam.h for definition of the bp_tag structure and +tag value constants. First entry in the list must have type BP_TAG_FIRST, last +entry must have type BP_TAG_LAST. The address of the first list entry is +passed to the kernel in the register a2. The address type depends on MMU type: + +- For configurations without MMU, with region protection or with MPU the + address must be the physical address. +- For configurations with region translarion MMU or with MMUv3 and CONFIG_MMU=n + the address must be a valid address in the current mapping. The kernel will + not change the mapping on its own. +- For configurations with MMUv2 the address must be a virtual address in the + default virtual mapping (0xd0000000..0xffffffff). +- For configurations with MMUv3 and CONFIG_MMU=y the address may be either a + virtual or physical address. In either case it must be within the default + virtual mapping. It is considered physical if it is within the range of + physical addresses covered by the default KSEG mapping (XCHAL_KSEG_PADDR.. + XCHAL_KSEG_PADDR + XCHAL_KSEG_SIZE), otherwise it is considered virtual. diff --git a/Documentation/arch/xtensa/features.rst b/Documentation/arch/xtensa/features.rst new file mode 100644 index 000000000..28dcce175 --- /dev/null +++ b/Documentation/arch/xtensa/features.rst @@ -0,0 +1,3 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. kernel-feat:: features xtensa diff --git a/Documentation/arch/xtensa/index.rst b/Documentation/arch/xtensa/index.rst new file mode 100644 index 000000000..69952446a --- /dev/null +++ b/Documentation/arch/xtensa/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +Xtensa Architecture +=================== + +.. toctree:: + :maxdepth: 1 + + atomctl + booting + mmu + + features diff --git a/Documentation/arch/xtensa/mmu.rst b/Documentation/arch/xtensa/mmu.rst new file mode 100644 index 000000000..450573afa --- /dev/null +++ b/Documentation/arch/xtensa/mmu.rst @@ -0,0 +1,198 @@ +============================= +MMUv3 initialization sequence +============================= + +The code in the initialize_mmu macro sets up MMUv3 memory mapping +identically to MMUv2 fixed memory mapping. Depending on +CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is +located in addresses it was linked for (symbol undefined), or not +(symbol defined), so it needs to be position-independent. + +The code has the following assumptions: + + - This code fragment is run only on an MMU v3. + - TLBs are in their reset state. + - ITLBCFG and DTLBCFG are zero (reset state). + - RASID is 0x04030201 (reset state). + - PS.RING is zero (reset state). + - LITBASE is zero (reset state, PC-relative literals); required to be PIC. + +TLB setup proceeds along the following steps. + + Legend: + + - VA = virtual address (two upper nibbles of it); + - PA = physical address (two upper nibbles of it); + - pc = physical range that contains this code; + +After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff +or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below +0x40000000 or above. That address corresponds to next instruction to execute +in this code. After step 4, we jump to intended (linked) address of this code. +The scheme below assumes that the kernel is loaded below 0x40000000. + + ====== ===== ===== ===== ===== ====== ===== ===== + - Step0 Step1 Step2 Step3 Step4 Step5 + + VA PA PA PA PA VA PA PA + ====== ===== ===== ===== ===== ====== ===== ===== + E0..FF -> E0 -> E0 -> E0 F0..FF -> F0 -> F0 + C0..DF -> C0 -> C0 -> C0 E0..EF -> F0 -> F0 + A0..BF -> A0 -> A0 -> A0 D8..DF -> 00 -> 00 + 80..9F -> 80 -> 80 -> 80 D0..D7 -> 00 -> 00 + 60..7F -> 60 -> 60 -> 60 + 40..5F -> 40 -> pc -> pc 40..5F -> pc + 20..3F -> 20 -> 20 -> 20 + 00..1F -> 00 -> 00 -> 00 + ====== ===== ===== ===== ===== ====== ===== ===== + +The default location of IO peripherals is above 0xf0000000. This may be changed +using a "ranges" property in a device tree simple-bus node. See the Devicetree +Specification, section 4.5 for details on the syntax and semantics of +simple-bus nodes. The following limitations apply: + +1. Only top level simple-bus nodes are considered + +2. Only one (first) simple-bus node is considered + +3. Empty "ranges" properties are not supported + +4. Only the first triplet in the "ranges" property is considered + +5. The parent-bus-address value is rounded down to the nearest 256MB boundary + +6. The IO area covers the entire 256MB segment of parent-bus-address; the + "ranges" triplet length field is ignored + + +MMUv3 address space layouts. +============================ + +Default MMUv2-compatible layout:: + + Symbol VADDR Size + +------------------+ + | Userspace | 0x00000000 TASK_SIZE + +------------------+ 0x40000000 + +------------------+ + | Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE + +------------------+ + | KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE + +------------------+ 0x8e400000 + +------------------+ + | VMALLOC area | VMALLOC_START 0xc0000000 128MB - 64KB + +------------------+ VMALLOC_END + +------------------+ + | Cache aliasing | TLBTEMP_BASE_1 0xc8000000 DCACHE_WAY_SIZE + | remap area 1 | + +------------------+ + | Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE + | remap area 2 | + +------------------+ + +------------------+ + | KMAP area | PKMAP_BASE PTRS_PER_PTE * + | | DCACHE_N_COLORS * + | | PAGE_SIZE + | | (4MB * DCACHE_N_COLORS) + +------------------+ + | Atomic KMAP area | FIXADDR_START KM_TYPE_NR * + | | NR_CPUS * + | | DCACHE_N_COLORS * + | | PAGE_SIZE + +------------------+ FIXADDR_TOP 0xcffff000 + +------------------+ + | Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xd0000000 128MB + +------------------+ + | Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xd8000000 128MB + +------------------+ + | Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB + +------------------+ + | Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB + +------------------+ + + +256MB cached + 256MB uncached layout:: + + Symbol VADDR Size + +------------------+ + | Userspace | 0x00000000 TASK_SIZE + +------------------+ 0x40000000 + +------------------+ + | Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE + +------------------+ + | KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE + +------------------+ 0x8e400000 + +------------------+ + | VMALLOC area | VMALLOC_START 0xa0000000 128MB - 64KB + +------------------+ VMALLOC_END + +------------------+ + | Cache aliasing | TLBTEMP_BASE_1 0xa8000000 DCACHE_WAY_SIZE + | remap area 1 | + +------------------+ + | Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE + | remap area 2 | + +------------------+ + +------------------+ + | KMAP area | PKMAP_BASE PTRS_PER_PTE * + | | DCACHE_N_COLORS * + | | PAGE_SIZE + | | (4MB * DCACHE_N_COLORS) + +------------------+ + | Atomic KMAP area | FIXADDR_START KM_TYPE_NR * + | | NR_CPUS * + | | DCACHE_N_COLORS * + | | PAGE_SIZE + +------------------+ FIXADDR_TOP 0xaffff000 + +------------------+ + | Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xb0000000 256MB + +------------------+ + | Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 256MB + +------------------+ + +------------------+ + | Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB + +------------------+ + | Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB + +------------------+ + + +512MB cached + 512MB uncached layout:: + + Symbol VADDR Size + +------------------+ + | Userspace | 0x00000000 TASK_SIZE + +------------------+ 0x40000000 + +------------------+ + | Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE + +------------------+ + | KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE + +------------------+ 0x8e400000 + +------------------+ + | VMALLOC area | VMALLOC_START 0x90000000 128MB - 64KB + +------------------+ VMALLOC_END + +------------------+ + | Cache aliasing | TLBTEMP_BASE_1 0x98000000 DCACHE_WAY_SIZE + | remap area 1 | + +------------------+ + | Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE + | remap area 2 | + +------------------+ + +------------------+ + | KMAP area | PKMAP_BASE PTRS_PER_PTE * + | | DCACHE_N_COLORS * + | | PAGE_SIZE + | | (4MB * DCACHE_N_COLORS) + +------------------+ + | Atomic KMAP area | FIXADDR_START KM_TYPE_NR * + | | NR_CPUS * + | | DCACHE_N_COLORS * + | | PAGE_SIZE + +------------------+ FIXADDR_TOP 0x9ffff000 + +------------------+ + | Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xa0000000 512MB + +------------------+ + | Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 512MB + +------------------+ + | Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB + +------------------+ + | Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB + +------------------+ -- cgit v1.3.1