From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/admin-guide/video-output.rst | 34 ++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/admin-guide/video-output.rst (limited to 'Documentation/admin-guide/video-output.rst') diff --git a/Documentation/admin-guide/video-output.rst b/Documentation/admin-guide/video-output.rst new file mode 100644 index 000000000..56d6fa2e2 --- /dev/null +++ b/Documentation/admin-guide/video-output.rst @@ -0,0 +1,34 @@ +Video Output Switcher Control +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +2006 luming.yu@intel.com + +The output sysfs class driver provides an abstract video output layer that +can be used to hook platform specific methods to enable/disable video output +device through common sysfs interface. For example, on my IBM ThinkPad T42 +laptop, The ACPI video driver registered its output devices and read/write +method for 'state' with output sysfs class. The user interface under sysfs is:: + + linux:/sys/class/video_output # tree . + . + |-- CRT0 + | |-- device -> ../../../devices/pci0000:00/0000:00:01.0 + | |-- state + | |-- subsystem -> ../../../class/video_output + | `-- uevent + |-- DVI0 + | |-- device -> ../../../devices/pci0000:00/0000:00:01.0 + | |-- state + | |-- subsystem -> ../../../class/video_output + | `-- uevent + |-- LCD0 + | |-- device -> ../../../devices/pci0000:00/0000:00:01.0 + | |-- state + | |-- subsystem -> ../../../class/video_output + | `-- uevent + `-- TV0 + |-- device -> ../../../devices/pci0000:00/0000:00:01.0 + |-- state + |-- subsystem -> ../../../class/video_output + `-- uevent + -- cgit v1.3.1