From 034dd340b08be1f2f0477ad16131d609f9dbd53c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 30 Aug 2026 09:22:00 -0700 Subject: Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix error output of boot instance creation failure Currently if a boot instance creation fails, instead of printing out the name of the instance that failed, it prints "(null)". That is because it prints "cur_str" that had already been processed by strsep(). Print the saved name instead. While at it, print the error code of the failure. - Fix use-after-free for same named historgrams Histograms can be named so that they can be used in multiple events. But if the named histogram has a variable attached, the second event that uses the named histogram which duplicates it and needs to free the original after duplication leaves the old variable in place and still visible. If another histogram uses than variable, it will use the stale one which will try to reference the freed duplicate histogram and crash the kernel. Free the duplicate variables along with the duplicated histogram data. - Check return value of kthread_run() in event self test The events self tests uses a kthread for testing but does not check if it succeeded in creating a kthread. If the kthread creation were to fail, the code will still try to call kthread_stop() on the error returned. - Fix race between reading trace_pipe and updating subbuffer size If a user is reading the trace_pipe file at the same time they update the ring buffer sub-buffer size, can cause the trace_pipe read to read stale data. Add trace_access_lock() around updating the ring buffer sub-buffer size. - Fix eventfs_inode on failure path in creation of the events directory In the creation of the "events" directory, if after allocating the eventfs_inode a failure is detected, it calls cleanup_ei() which calls free_ei(). The free_ei() will test if eventfs_inode being freed has no children. It is a bug if it does. But on the failure case of the creation of the "events" directory, the children lists have not yet been initialized and the free will trigger a warning because list_empty() on an uninitialized list returns false. Move the initialization into init_ei() where it makes more sense and makes sure that a created eventfs_inode has its lists initialized upon creation. - Check return value of kthread_run() in ftrace direct sample code The sample code that shows how to use the ftrace direct calls does not test the return of kthread_run() to see if it succeeds. Return a failure if the kthread_run() doesn't succeed. - Clear user events state on fork in case of alloc failure On fork, the child gets a pointer to the parent's user events state. It makes a copy of it then updates the child's pointer to it. But if the allocation fails, the duplication function leaves the child with a pointer to its parent's descriptor. When the child cleans up its data, it will free the parent's descriptor while the parent is still using it. In the duplication function, set the child's user_event_mm to NULL before testing if the allocation succeeded, and when it exits it will not free the parent's descriptor. - Fix retry exhaustion in simple ring buffer reader swap simple_ring_buffer_swap_reader_page() starts with retry set to 8 and post-decrements it only after a failed link replacement. On the final attempt, a successful replacement leaves retry at zero, while a failed replacement leaves it at -1. But the check for success expects the retry value to be non-zero and exits with an error on zero. This is the opposite result. Fix it. - Fail nicely when the remote swap_reader_page() returns an error Currently, if the swap_reader_page() of a remote buffer fails, it triggers a WARN_ON_ONCE() and continues normally. Instead, have it exit with an error and a pr_warn() print instead of a full WARNING. * tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Stop remote reader update when page swap fails tracing: Fix retry exhaustion in simple ring buffer reader swap tracing/user_events: Clear copied tracing state before fork duplication samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify eventfs: Initialize ei->children and ei->list in init_ei() tracing: Fix use-after-free in trace_pipe read on sub-buffer order change tracing: Fix crash passing ERR_PTR to kthread_stop() tracing: Fix use-after-free with same-name named triggers tracing: Fix logged instance name on creation failure --- Documentation/admin-guide/pnp.rst | 285 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100644 Documentation/admin-guide/pnp.rst (limited to 'Documentation/admin-guide/pnp.rst') diff --git a/Documentation/admin-guide/pnp.rst b/Documentation/admin-guide/pnp.rst new file mode 100644 index 000000000..24d80e3eb --- /dev/null +++ b/Documentation/admin-guide/pnp.rst @@ -0,0 +1,285 @@ +================================= +Linux Plug and Play Documentation +================================= + +:Author: Adam Belay +:Last updated: Oct. 16, 2002 + + +Overview +-------- + +Plug and Play provides a means of detecting and setting resources for legacy or +otherwise unconfigurable devices. The Linux Plug and Play Layer provides these +services to compatible drivers. + + +The User Interface +------------------ + +The Linux Plug and Play user interface provides a means to activate PnP devices +for legacy and user level drivers that do not support Linux Plug and Play. The +user interface is integrated into sysfs. + +In addition to the standard sysfs file the following are created in each +device's directory: +- id - displays a list of support EISA IDs +- options - displays possible resource configurations +- resources - displays currently allocated resources and allows resource changes + +activating a device +^^^^^^^^^^^^^^^^^^^ + +:: + + # echo "auto" > resources + +this will invoke the automatic resource config system to activate the device + +manually activating a device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:: + + # echo "manual " > resources + + - the configuration number + - static or dynamic + static = for next boot + dynamic = now + +disabling a device +^^^^^^^^^^^^^^^^^^ + +:: + + # echo "disable" > resources + + +EXAMPLE: + +Suppose you need to activate the floppy disk controller. + +1. change to the proper directory, in my case it is + /driver/bus/pnp/devices/00:0f:: + + # cd /driver/bus/pnp/devices/00:0f + # cat name + PC standard floppy disk controller + +2. check if the device is already active:: + + # cat resources + DISABLED + + - Notice the string "DISABLED". This means the device is not active. + +3. check the device's possible configurations (optional):: + + # cat options + Dependent: 01 - Priority acceptable + port 0x3f0-0x3f0, align 0x7, size 0x6, 16-bit address decoding + port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding + irq 6 + dma 2 8-bit compatible + Dependent: 02 - Priority acceptable + port 0x370-0x370, align 0x7, size 0x6, 16-bit address decoding + port 0x377-0x377, align 0x0, size 0x1, 16-bit address decoding + irq 6 + dma 2 8-bit compatible + +4. now activate the device:: + + # echo "auto" > resources + +5. finally check if the device is active:: + + # cat resources + io 0x3f0-0x3f5 + io 0x3f7-0x3f7 + irq 6 + dma 2 + +also there are a series of kernel parameters:: + + pnp_reserve_irq=irq1[,irq2] .... + pnp_reserve_dma=dma1[,dma2] .... + pnp_reserve_io=io1,size1[,io2,size2] .... + pnp_reserve_mem=mem1,size1[,mem2,size2] .... + + + +The Unified Plug and Play Layer +------------------------------- + +All Plug and Play drivers, protocols, and services meet at a central location +called the Plug and Play Layer. This layer is responsible for the exchange of +information between PnP drivers and PnP protocols. Thus it automatically +forwards commands to the proper protocol. This makes writing PnP drivers +significantly easier. + +The following functions are available from the Plug and Play Layer: + +pnp_get_protocol + increments the number of uses by one + +pnp_put_protocol + deincrements the number of uses by one + +pnp_register_protocol + use this to register a new PnP protocol + +pnp_register_driver + adds a PnP driver to the Plug and Play Layer + + this includes driver model integration + returns zero for success or a negative error number for failure; count + calls to the .add() method if you need to know how many devices bind to + the driver + +pnp_unregister_driver + removes a PnP driver from the Plug and Play Layer + + + +Plug and Play Protocols +----------------------- + +This section contains information for PnP protocol developers. + +The following Protocols are currently available in the computing world: + +- PNPBIOS: + used for system devices such as serial and parallel ports. +- ISAPNP: + provides PnP support for the ISA bus +- ACPI: + among its many uses, ACPI provides information about system level + devices. + +It is meant to replace the PNPBIOS. It is not currently supported by Linux +Plug and Play but it is planned to be in the near future. + + +Requirements for a Linux PnP protocol: +1. the protocol must use EISA IDs +2. the protocol must inform the PnP Layer of a device's current configuration + +- the ability to set resources is optional but preferred. + +The following are PnP protocol related functions: + +pnp_add_device + use this function to add a PnP device to the PnP layer + + only call this function when all wanted values are set in the pnp_dev + structure + +pnp_init_device + call this to initialize the PnP structure + +pnp_remove_device + call this to remove a device from the Plug and Play Layer. + it will fail if the device is still in use. + automatically will free mem used by the device and related structures + +pnp_add_id + adds an EISA ID to the list of supported IDs for the specified device + +For more information consult the source of a protocol such as +/drivers/pnp/pnpbios/core.c. + + + +Linux Plug and Play Drivers +--------------------------- + +This section contains information for Linux PnP driver developers. + +The New Way +^^^^^^^^^^^ + +1. first make a list of supported EISA IDS + + ex:: + + static const struct pnp_id pnp_dev_table[] = { + /* Standard LPT Printer Port */ + {.id = "PNP0400", .driver_data = 0}, + /* ECP Printer Port */ + {.id = "PNP0401", .driver_data = 0}, + {.id = ""} + }; + + Please note that the character 'X' can be used as a wild card in the function + portion (last four characters). + + ex:: + + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + + Supported PnP card IDs can optionally be defined. + ex:: + + static const struct pnp_id pnp_card_table[] = { + { "ANYDEVS", 0 }, + { "", 0 } + }; + +2. Optionally define probe and remove functions. It may make sense not to + define these functions if the driver already has a reliable method of detecting + the resources, such as the parport_pc driver. + + ex:: + + static int + serial_pnp_probe(struct pnp_dev * dev, const struct pnp_id *card_id, const + struct pnp_id *dev_id) + { + . . . + + ex:: + + static void serial_pnp_remove(struct pnp_dev * dev) + { + . . . + + consult /drivers/serial/8250_pnp.c for more information. + +3. create a driver structure + + ex:: + + static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .card_id_table = pnp_card_table, + .id_table = pnp_dev_table, + .probe = serial_pnp_probe, + .remove = serial_pnp_remove, + }; + + * name and id_table cannot be NULL. + +4. register the driver + + ex:: + + static int __init serial8250_pnp_init(void) + { + return pnp_register_driver(&serial_pnp_driver); + } + +The Old Way +^^^^^^^^^^^ + +A series of compatibility functions have been created to make it easy to convert +ISAPNP drivers. They should serve as a temporary solution only. + +They are as follows:: + + struct pnp_dev *pnp_find_dev(struct pnp_card *card, + unsigned short vendor, + unsigned short function, + struct pnp_dev *from) + -- cgit v1.3.1