From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/admin-guide/media/vimc.dot | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/admin-guide/media/vimc.dot (limited to 'Documentation/admin-guide/media/vimc.dot') diff --git a/Documentation/admin-guide/media/vimc.dot b/Documentation/admin-guide/media/vimc.dot new file mode 100644 index 000000000..92a5bb631 --- /dev/null +++ b/Documentation/admin-guide/media/vimc.dot @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 + +digraph board { + rankdir=TB + n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port0 -> n00000005:port0 [style=bold] + n00000001:port0 -> n0000000b [style=bold] + n00000001 -> n00000002 + n00000002 [label="{{} | Lens A\n/dev/v4l-subdev5 | {}}", shape=Mrecord, style=filled, fillcolor=green] + n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000003:port0 -> n00000008:port0 [style=bold] + n00000003:port0 -> n0000000f [style=bold] + n00000003 -> n00000004 + n00000004 [label="{{} | Lens B\n/dev/v4l-subdev6 | {}}", shape=Mrecord, style=filled, fillcolor=green] + n00000005 [label="{{ 0} | Debayer A\n/dev/v4l-subdev2 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000005:port1 -> n00000015:port0 + n00000008 [label="{{ 0} | Debayer B\n/dev/v4l-subdev3 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000008:port1 -> n00000015:port0 [style=dashed] + n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000013 [label="{{} | RGB/YUV Input\n/dev/v4l-subdev4 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000013:port0 -> n00000015:port0 [style=dashed] + n00000015 [label="{{ 0} | Scaler\n/dev/v4l-subdev5 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000015:port1 -> n00000018 [style=bold] + n00000018 [label="RGB/YUV Capture\n/dev/video2", shape=box, style=filled, fillcolor=yellow] +} -- cgit v1.3.1