From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/admin-guide/lcd-panel-cgram.rst | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/admin-guide/lcd-panel-cgram.rst (limited to 'Documentation/admin-guide/lcd-panel-cgram.rst') diff --git a/Documentation/admin-guide/lcd-panel-cgram.rst b/Documentation/admin-guide/lcd-panel-cgram.rst new file mode 100644 index 000000000..a3eb00c62 --- /dev/null +++ b/Documentation/admin-guide/lcd-panel-cgram.rst @@ -0,0 +1,27 @@ +====================================== +Parallel port LCD/Keypad Panel support +====================================== + +Some LCDs allow you to define up to 8 characters, mapped to ASCII +characters 0 to 7. The escape code to define a new character is +'\e[LG' followed by one digit from 0 to 7, representing the character +number, and up to 8 couples of hex digits terminated by a semi-colon +(';'). Each couple of digits represents a line, with 1-bits for each +illuminated pixel with LSB on the right. Lines are numbered from the +top of the character to the bottom. On a 5x7 matrix, only the 5 lower +bits of the 7 first bytes are used for each character. If the string +is incomplete, only complete lines will be redefined. Here are some +examples:: + + printf "\e[LG0010101050D1F0C04;" => 0 = [enter] + printf "\e[LG1040E1F0000000000;" => 1 = [up] + printf "\e[LG2000000001F0E0400;" => 2 = [down] + printf "\e[LG3040E1F001F0E0400;" => 3 = [up-down] + printf "\e[LG40002060E1E0E0602;" => 4 = [left] + printf "\e[LG500080C0E0F0E0C08;" => 5 = [right] + printf "\e[LG60016051516141400;" => 6 = "IP" + + printf "\e[LG00103071F1F070301;" => big speaker + printf "\e[LG00002061E1E060200;" => small speaker + +Willy -- cgit v1.3.1