From 4617721c502b2ddaa4e324e86da4997edf738fa5 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 2 Sep 2026 09:55:01 -0400 Subject: ftrace: Synchronize the initialization of ftrace_ops There's some internal state that ftrace_ops needs to have set, but since it can be declared outside of the ftrace.c code, it calls ftrace_ops_init() on the ops in every global function. The issue is that if two tasks call it on the same ops at the same time it is possible to have the initialization of one corrupt the initialization of the other call. Create a ops_mutex to use to synchronize every initialization of the ftrace_ops. The mutex is taken within checking the ftrace_ops flag that states it was initializied but the flag is checked again after the mutex has been taken. Checking first outside the mutex allows it to shortcut having to take the mutex. But then the check needs to be done again after the mute is taken in case of races. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock") Reported-by: sashiko-bot@kernel.org Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/ Signed-off-by: Steven Rostedt --- .../admin-guide/laptops/alienware-wmi.rst | 127 +++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/admin-guide/laptops/alienware-wmi.rst (limited to 'Documentation/admin-guide/laptops/alienware-wmi.rst') diff --git a/Documentation/admin-guide/laptops/alienware-wmi.rst b/Documentation/admin-guide/laptops/alienware-wmi.rst new file mode 100644 index 000000000..e532c60db --- /dev/null +++ b/Documentation/admin-guide/laptops/alienware-wmi.rst @@ -0,0 +1,127 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +==================== +Alienware WMI Driver +==================== + +Kurt Borja + +This is a driver for the "WMAX" WMI device, which is found in most Dell gaming +laptops and controls various special features. + +Before the launch of M-Series laptops (~2018), the "WMAX" device controlled +basic RGB lighting, deep sleep mode, HDMI mode and amplifier status. + +Later, this device was completely repurpused. Now it mostly deals with thermal +profiles, sensor monitoring and overclocking. This interface is named "AWCC" and +is known to be used by the AWCC OEM application to control these features. + +The alienware-wmi driver controls both interfaces. + +AWCC Interface +============== + +WMI device documentation: Documentation/wmi/devices/alienware-wmi.rst + +Supported devices +----------------- + +- Alienware M-Series laptops +- Alienware X-Series laptops +- Alienware Aurora Desktops +- Dell G-Series laptops + +If you believe your device supports the AWCC interface and you don't have any of +the features described in this document, try the following alienware-wmi module +parameters: + +- ``force_platform_profile=1``: Forces probing for platform profile support +- ``force_hwmon=1``: Forces probing for HWMON support + +If the module loads successfully with these parameters, consider submitting a +patch adding your model to the ``awcc_dmi_table`` located in +``drivers/platform/x86/dell/alienware-wmi-wmax.c`` or contacting the maintainer +for further guidance. + +Status +------ + +The following features are currently supported: + +- :ref:`Platform Profile `: + + - Thermal profile control + + - G-Mode toggling + +- :ref:`HWMON `: + + - Sensor monitoring + + - Manual fan control + +.. _platform-profile: + +Platform Profile +---------------- + +The AWCC interface exposes various firmware defined thermal profiles. These are +exposed to user-space through the Platform Profile class interface. Refer to +:ref:`sysfs-class-platform-profile ` +for more information. + +The name of the platform-profile class device exported by this driver is +"alienware-wmi" and it's path can be found with: + +:: + + grep -l "alienware-wmi" /sys/class/platform-profile/platform-profile-*/name | sed 's|/[^/]*$||' + +If the device supports G-Mode, it is also toggled when selecting the +``performance`` profile. + +.. note:: + You may set the ``force_gmode`` module parameter to always try to toggle this + feature, without checking if your model supports it. + +.. _hwmon: + +HWMON +----- + +The AWCC interface also supports sensor monitoring and manual fan control. Both +of these features are exposed to user-space through the HWMON interface. + +The name of the hwmon class device exported by this driver is "alienware_wmi" +and it's path can be found with: + +:: + + grep -l "alienware_wmi" /sys/class/hwmon/hwmon*/name | sed 's|/[^/]*$||' + +Sensor monitoring is done through the standard HWMON interface. Refer to +:ref:`sysfs-class-hwmon ` for more +information. + +Manual fan control on the other hand, is not exposed directly by the AWCC +interface. Instead it let's us control a fan `boost` value. This `boost` value +has the following approximate behavior over the fan pwm: + +:: + + pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base) + +Due to the above behavior, the fan `boost` control is exposed to user-space +through the following, custom hwmon sysfs attribute: + +=============================== ======= ======================================= +Name Perm Description +=============================== ======= ======================================= +fan[1-4]_boost RW Fan boost value. + + Integer value between 0 and 255 +=============================== ======= ======================================= + +.. note:: + In some devices, manual fan control only works reliably if the ``custom`` + platform profile is selected. -- cgit v1.3.1