From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/admin-guide/init.rst | 48 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/admin-guide/init.rst (limited to 'Documentation/admin-guide/init.rst') diff --git a/Documentation/admin-guide/init.rst b/Documentation/admin-guide/init.rst new file mode 100644 index 000000000..41f06a091 --- /dev/null +++ b/Documentation/admin-guide/init.rst @@ -0,0 +1,48 @@ +Explaining the "No working init found." boot hang message +========================================================= +:Authors: Andreas Mohr + Cristian Souza + +This document provides some high-level reasons for failure +(listed roughly in order of execution) to load the init binary. + +1) **Unable to mount root FS**: Set "debug" kernel parameter (in bootloader + config file or CONFIG_CMDLINE) to get more detailed kernel messages. + +2) **init binary doesn't exist on rootfs**: Make sure you have the correct + root FS type (and ``root=`` kernel parameter points to the correct + partition), required drivers such as storage hardware (such as SCSI or + USB!) and filesystem (ext3, jffs2, etc.) are builtin (alternatively as + modules, to be pre-loaded by an initrd). + +3) **Broken console device**: Possibly a conflict in ``console= setup`` + --> initial console unavailable. E.g. some serial consoles are unreliable + due to serial IRQ issues (e.g. missing interrupt-based configuration). + Try using a different ``console= device`` or e.g. ``netconsole=``. + +4) **Binary exists but dependencies not available**: E.g. required library + dependencies of the init binary such as ``/lib/ld-linux.so.2`` missing or + broken. Use ``readelf -d |grep NEEDED`` to find out which libraries + are required. + +5) **Binary cannot be loaded**: Make sure the binary's architecture matches + your hardware. E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM + hardware. In case you tried loading a non-binary file here (shell script?), + you should make sure that the script specifies an interpreter in its + shebang header line (``#!/...``) that is fully working (including its + library dependencies). And before tackling scripts, better first test a + simple non-script binary such as ``/bin/sh`` and confirm its successful + execution. To find out more, add code ``to init/main.c`` to display + kernel_execve()s return values. + +Please extend this explanation whenever you find new failure causes +(after all loading the init binary is a CRITICAL and hard transition step +which needs to be made as painless as possible), then submit a patch to LKML. +Further TODOs: + +- Implement the various ``run_init_process()`` invocations via a struct array + which can then store the ``kernel_execve()`` result value and on failure + log it all by iterating over **all** results (very important usability fix). +- Try to make the implementation itself more helpful in general, e.g. by + providing additional error messages at affected places. + -- cgit v1.3.1