From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- .../admin-guide/device-mapper/dm-init.rst | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 Documentation/admin-guide/device-mapper/dm-init.rst (limited to 'Documentation/admin-guide/device-mapper/dm-init.rst') diff --git a/Documentation/admin-guide/device-mapper/dm-init.rst b/Documentation/admin-guide/device-mapper/dm-init.rst new file mode 100644 index 000000000..981d6a907 --- /dev/null +++ b/Documentation/admin-guide/device-mapper/dm-init.rst @@ -0,0 +1,133 @@ +================================ +Early creation of mapped devices +================================ + +It is possible to configure a device-mapper device to act as the root device for +your system in two ways. + +The first is to build an initial ramdisk which boots to a minimal userspace +which configures the device, then pivot_root(8) in to it. + +The second is to create one or more device-mappers using the module parameter +"dm-mod.create=" through the kernel boot command line argument. + +The format is specified as a string of data separated by commas and optionally +semi-colons, where: + + - a comma is used to separate fields like name, uuid, flags and table + (specifies one device) + - a semi-colon is used to separate devices. + +So the format will look like this:: + + dm-mod.create=,,,,[,
+][;,,,,
[,
+]+] + +Where:: + + ::= The device name. + ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | "" + ::= The device minor number | "" + ::= "ro" | "rw" +
::= + ::= "verity" | "linear" | ... (see list below) + +The dm line should be equivalent to the one used by the dmsetup tool with the +`--concise` argument. + +Target types +============ + +Not all target types are available as there are serious risks in allowing +activation of certain DM targets without first using userspace tools to check +the validity of associated metadata. + +======================= ======================================================= +`cache` constrained, userspace should verify cache device +`crypt` allowed +`delay` allowed +`era` constrained, userspace should verify metadata device +`flakey` constrained, meant for test +`linear` allowed +`log-writes` constrained, userspace should verify metadata device +`mirror` constrained, userspace should verify main/mirror device +`raid` constrained, userspace should verify metadata device +`snapshot` constrained, userspace should verify src/dst device +`snapshot-origin` allowed +`snapshot-merge` constrained, userspace should verify src/dst device +`striped` allowed +`switch` constrained, userspace should verify dev path +`thin` constrained, requires dm target message from userspace +`thin-pool` constrained, requires dm target message from userspace +`verity` allowed +`writecache` constrained, userspace should verify cache device +`zero` constrained, not meant for rootfs +======================= ======================================================= + +If the target is not listed above, it is constrained by default (not tested). + +Examples +======== +An example of booting to a linear array made up of user-mode linux block +devices:: + + dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0 + +This will boot to a rw dm-linear target of 8192 sectors split across two block +devices identified by their major:minor numbers. After boot, udev will rename +this target to /dev/mapper/lroot (depending on the rules). No uuid was assigned. + +An example of multiple device-mappers, with the dm-mod.create="..." contents +is shown here split on multiple lines for readability:: + + dm-linear,,1,rw, + 0 32768 linear 8:1 0, + 32768 1024000 linear 8:2 0; + dm-verity,,3,ro, + 0 1638400 verity 1 /dev/sdc1 /dev/sdc2 4096 4096 204800 1 sha256 + ac87db56303c9c1da433d7209b5a6ef3e4779df141200cbd7c157dcb8dd89c42 + 5ebfe87f7df3235b80a117ebc4078e44f55045487ad4a96581d1adb564615b51 + +Other examples (per target): + +"crypt":: + + dm-crypt,,8,ro, + 0 1048576 crypt aes-xts-plain64 + babebabebabebabebabebabebabebabebabebabebabebabebabebabebabebabe 0 + /dev/sda 0 1 allow_discards + +"delay":: + + dm-delay,,4,ro,0 409600 delay /dev/sda1 0 500 + +"linear":: + + dm-linear,,,rw, + 0 32768 linear /dev/sda1 0, + 32768 1024000 linear /dev/sda2 0, + 1056768 204800 linear /dev/sda3 0, + 1261568 512000 linear /dev/sda4 0 + +"snapshot-origin":: + + dm-snap-orig,,4,ro,0 409600 snapshot-origin 8:2 + +"striped":: + + dm-striped,,4,ro,0 1638400 striped 4 4096 + /dev/sda1 0 /dev/sda2 0 /dev/sda3 0 /dev/sda4 0 + +"verity":: + + dm-verity,,4,ro, + 0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256 + fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd + 51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584 + +For setups using device-mapper on top of asynchronously probed block +devices (MMC, USB, ..), it may be necessary to tell dm-init to +explicitly wait for them to become available before setting up the +device-mapper tables. This can be done with the "dm-mod.waitfor=" +module parameter, which takes a list of devices to wait for:: + + dm-mod.waitfor=[,..,] -- cgit v1.3.1