From 5febf432df1cfa5b25d99b54c32103fafbdd0eb9 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Sun, 16 Aug 2026 15:32:33 +0200 Subject: kbuild: rust: keep Rust objects out of Clang LTO with inline helpers Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit `objtool` errors such as: vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a: can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd The reason is that in such builds, the Clang invocation that compiles the combined Rust plus helpers bitcode emits LLVM bitcode (again) -- the final code generation happens in the linker's LTO step, which the `-mllvm` trap options passed to Clang do not reach. This, in turn, means that unreachable traps are missing, and the impossible paths do not merely fallthrough to the next symbol, but past the end of their own section, since LTO builds place each function in its own section. Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always emits machine code directly, with the traps in place. Assisted-by: LLM Cc: Gary Guo Cc: Boqun Feng Cc: Alice Ryhl Cc: Matthew Maurer Cc: Josh Poimboeuf Cc: Peter Zijlstra Cc: stable@vger.kernel.org Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust") Acked-by: Gary Guo Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda --- Documentation/admin-guide/braille-console.rst | 38 +++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/admin-guide/braille-console.rst (limited to 'Documentation/admin-guide/braille-console.rst') diff --git a/Documentation/admin-guide/braille-console.rst b/Documentation/admin-guide/braille-console.rst new file mode 100644 index 000000000..153472e93 --- /dev/null +++ b/Documentation/admin-guide/braille-console.rst @@ -0,0 +1,38 @@ +Linux Braille Console +===================== + +To get early boot messages on a braille device (before userspace screen +readers can start), you first need to compile the support for the usual serial +console (see :ref:`Documentation/admin-guide/serial-console.rst `), and +for braille device +(in :menuselection:`Device Drivers --> Accessibility support --> Console on braille device`). + +Then you need to specify a ``console=brl``, option on the kernel command line, the +format is:: + + console=brl,serial_options... + +where ``serial_options...`` are the same as described in +:ref:`Documentation/admin-guide/serial-console.rst `. + +So for instance you can use ``console=brl,ttyS0`` if the braille device is connected to the first serial port, and ``console=brl,ttyS0,115200`` to +override the baud rate to 115200, etc. + +By default, the braille device will just show the last kernel message (console +mode). To review previous messages, press the Insert key to switch to the VT +review mode. In review mode, the arrow keys permit to browse in the VT content, +`PAGE-UP`/`PAGE-DOWN` keys go at the top/bottom of the screen, and +the `HOME` key goes back +to the cursor, hence providing very basic screen reviewing facility. + +Sound feedback can be obtained by adding the ``braille_console.sound=1`` kernel +parameter. + +For simplicity, only one braille console can be enabled, other uses of +``console=brl,...`` will be discarded. Also note that it does not interfere with +the console selection mechanism described in +:ref:`Documentation/admin-guide/serial-console.rst `. + +For now, only the VisioBraille device is supported. + +Samuel Thibault -- cgit v1.3.1