From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- .../admin-guide/auxdisplay/cfag12864b.rst | 98 ++++++++++++++++++++++ Documentation/admin-guide/auxdisplay/index.rst | 9 ++ Documentation/admin-guide/auxdisplay/ks0108.rst | 50 +++++++++++ 3 files changed, 157 insertions(+) create mode 100644 Documentation/admin-guide/auxdisplay/cfag12864b.rst create mode 100644 Documentation/admin-guide/auxdisplay/index.rst create mode 100644 Documentation/admin-guide/auxdisplay/ks0108.rst (limited to 'Documentation/admin-guide/auxdisplay') diff --git a/Documentation/admin-guide/auxdisplay/cfag12864b.rst b/Documentation/admin-guide/auxdisplay/cfag12864b.rst new file mode 100644 index 000000000..da385d851 --- /dev/null +++ b/Documentation/admin-guide/auxdisplay/cfag12864b.rst @@ -0,0 +1,98 @@ +=================================== +cfag12864b LCD Driver Documentation +=================================== + +:License: GPLv2 +:Author & Maintainer: Miguel Ojeda +:Date: 2006-10-27 + + + +.. INDEX + + 1. DRIVER INFORMATION + 2. DEVICE INFORMATION + 3. WIRING + 4. USERSPACE PROGRAMMING + +1. Driver Information +--------------------- + +This driver supports a cfag12864b LCD. + + +2. Device Information +--------------------- + +:Manufacturer: Crystalfontz +:Device Name: Crystalfontz 12864b LCD Series +:Device Code: cfag12864b +:Webpage: http://www.crystalfontz.com +:Device Webpage: http://www.crystalfontz.com/products/12864b/ +:Type: LCD (Liquid Crystal Display) +:Width: 128 +:Height: 64 +:Colors: 2 (B/N) +:Controller: ks0108 +:Controllers: 2 +:Pages: 8 each controller +:Addresses: 64 each page +:Data size: 1 byte each address +:Memory size: 2 * 8 * 64 * 1 = 1024 bytes = 1 Kbyte + + +3. Wiring +--------- + +The cfag12864b LCD Series don't have official wiring. + +The common wiring is done to the parallel port as shown:: + + Parallel Port cfag12864b + + Name Pin# Pin# Name + + Strobe ( 1)------------------------------(17) Enable + Data 0 ( 2)------------------------------( 4) Data 0 + Data 1 ( 3)------------------------------( 5) Data 1 + Data 2 ( 4)------------------------------( 6) Data 2 + Data 3 ( 5)------------------------------( 7) Data 3 + Data 4 ( 6)------------------------------( 8) Data 4 + Data 5 ( 7)------------------------------( 9) Data 5 + Data 6 ( 8)------------------------------(10) Data 6 + Data 7 ( 9)------------------------------(11) Data 7 + (10) [+5v]---( 1) Vdd + (11) [GND]---( 2) Ground + (12) [+5v]---(14) Reset + (13) [GND]---(15) Read / Write + Line (14)------------------------------(13) Controller Select 1 + (15) + Init (16)------------------------------(12) Controller Select 2 + Select (17)------------------------------(16) Data / Instruction + Ground (18)---[GND] [+5v]---(19) LED + + Ground (19)---[GND] + Ground (20)---[GND] E A Values: + Ground (21)---[GND] [GND]---[P1]---(18) Vee - R = Resistor = 22 ohm + Ground (22)---[GND] | - P1 = Preset = 10 Kohm + Ground (23)---[GND] ---- S ------( 3) V0 - P2 = Preset = 1 Kohm + Ground (24)---[GND] | | + Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED - + + +4. Userspace Programming +------------------------ + +The cfag12864bfb describes a framebuffer device (/dev/fbX). + +It has a size of 1024 bytes = 1 Kbyte. +Each bit represents one pixel. If the bit is high, the pixel will +turn on. If the pixel is low, the pixel will turn off. + +You can use the framebuffer as a file: fopen, fwrite, fclose... +Although the LCD won't get updated until the next refresh time arrives. + +Also, you can mmap the framebuffer: open & mmap, munmap & close... +which is the best option for most uses. + +Check samples/auxdisplay/cfag12864b-example.c +for a real working userspace complete program with usage examples. diff --git a/Documentation/admin-guide/auxdisplay/index.rst b/Documentation/admin-guide/auxdisplay/index.rst new file mode 100644 index 000000000..31eae0825 --- /dev/null +++ b/Documentation/admin-guide/auxdisplay/index.rst @@ -0,0 +1,9 @@ +========================= +Auxiliary Display Support +========================= + +.. toctree:: + :maxdepth: 1 + + ks0108.rst + cfag12864b.rst diff --git a/Documentation/admin-guide/auxdisplay/ks0108.rst b/Documentation/admin-guide/auxdisplay/ks0108.rst new file mode 100644 index 000000000..a7d3fe509 --- /dev/null +++ b/Documentation/admin-guide/auxdisplay/ks0108.rst @@ -0,0 +1,50 @@ +========================================== +ks0108 LCD Controller Driver Documentation +========================================== + +:License: GPLv2 +:Author & Maintainer: Miguel Ojeda +:Date: 2006-10-27 + + + +.. INDEX + + 1. DRIVER INFORMATION + 2. DEVICE INFORMATION + 3. WIRING + + +1. Driver Information +--------------------- + +This driver supports the ks0108 LCD controller. + + +2. Device Information +--------------------- + +:Manufacturer: Samsung +:Device Name: KS0108 LCD Controller +:Device Code: ks0108 +:Webpage: - +:Device Webpage: - +:Type: LCD Controller (Liquid Crystal Display Controller) +:Width: 64 +:Height: 64 +:Colors: 2 (B/N) +:Pages: 8 +:Addresses: 64 each page +:Data size: 1 byte each address +:Memory size: 8 * 64 * 1 = 512 bytes + + +3. Wiring +--------- + +The driver supports data parallel port wiring. + +If you aren't building LCD related hardware, you should check +your LCD specific wiring information in the same folder. + +For example, check Documentation/admin-guide/auxdisplay/cfag12864b.rst -- cgit v1.3.1