From 6668ed271eaefaa63e686bdfbedaeb7b8e492722 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Fri, 4 Sep 2026 10:43:19 +0200 Subject: selftests/bpf: Reject graph kptr use after RCU unlock Add a sleepable verifier test that loads a graph-node local kptr in an explicit RCU read-side critical section, then passes its node to bpf_rbtree_remove() after the section ends. Before the verifier fix, the stale NON_OWN_REF flag makes the node look like a live borrowed reference and the program is accepted. After the fix, the pointer is demoted without NON_OWN_REF and the graph kfunc argument is rejected. Also exercise a graph kptr loaded while a spin lock provides implicit RCU protection. The pointer must be invalidated when the lock is released, which guards the required ordering between non-owning-reference invalidation and RCU demotion. Update the existing fault-protected load test state description. The post-unlock pointer no longer carries NON_OWN_REF, but remains readable because the load is rewritten to use BPF_PROBE_MEM. Signed-off-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/r/20260904084325.52250-7-memxor@gmail.com Signed-off-by: Alexei Starovoitov --- Documentation/PCI/endpoint/pci-test-function.rst | 103 +++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 Documentation/PCI/endpoint/pci-test-function.rst (limited to 'Documentation/PCI/endpoint/pci-test-function.rst') diff --git a/Documentation/PCI/endpoint/pci-test-function.rst b/Documentation/PCI/endpoint/pci-test-function.rst new file mode 100644 index 000000000..3c8521d7a --- /dev/null +++ b/Documentation/PCI/endpoint/pci-test-function.rst @@ -0,0 +1,103 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +PCI Test Function +================= + +:Author: Kishon Vijay Abraham I + +Traditionally PCI RC has always been validated by using standard +PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards. +However with the addition of EP-core in linux kernel, it is possible +to configure a PCI controller that can operate in EP mode to work as +a test device. + +The PCI endpoint test device is a virtual device (defined in software) +used to test the endpoint functionality and serve as a sample driver +for other PCI endpoint devices (to use the EP framework). + +The PCI endpoint test device has the following registers: + + 1) PCI_ENDPOINT_TEST_MAGIC + 2) PCI_ENDPOINT_TEST_COMMAND + 3) PCI_ENDPOINT_TEST_STATUS + 4) PCI_ENDPOINT_TEST_SRC_ADDR + 5) PCI_ENDPOINT_TEST_DST_ADDR + 6) PCI_ENDPOINT_TEST_SIZE + 7) PCI_ENDPOINT_TEST_CHECKSUM + 8) PCI_ENDPOINT_TEST_IRQ_TYPE + 9) PCI_ENDPOINT_TEST_IRQ_NUMBER + +* PCI_ENDPOINT_TEST_MAGIC + +This register will be used to test BAR0. A known pattern will be written +and read back from MAGIC register to verify BAR0. + +* PCI_ENDPOINT_TEST_COMMAND + +This register will be used by the host driver to indicate the function +that the endpoint device must perform. + +======== ================================================================ +Bitfield Description +======== ================================================================ +Bit 0 raise legacy IRQ +Bit 1 raise MSI IRQ +Bit 2 raise MSI-X IRQ +Bit 3 read command (read data from RC buffer) +Bit 4 write command (write data to RC buffer) +Bit 5 copy command (copy data from one RC buffer to another RC buffer) +======== ================================================================ + +* PCI_ENDPOINT_TEST_STATUS + +This register reflects the status of the PCI endpoint device. + +======== ============================== +Bitfield Description +======== ============================== +Bit 0 read success +Bit 1 read fail +Bit 2 write success +Bit 3 write fail +Bit 4 copy success +Bit 5 copy fail +Bit 6 IRQ raised +Bit 7 source address is invalid +Bit 8 destination address is invalid +======== ============================== + +* PCI_ENDPOINT_TEST_SRC_ADDR + +This register contains the source address (RC buffer address) for the +COPY/READ command. + +* PCI_ENDPOINT_TEST_DST_ADDR + +This register contains the destination address (RC buffer address) for +the COPY/WRITE command. + +* PCI_ENDPOINT_TEST_IRQ_TYPE + +This register contains the interrupt type (Legacy/MSI) triggered +for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands. + +Possible types: + +====== == +Legacy 0 +MSI 1 +MSI-X 2 +====== == + +* PCI_ENDPOINT_TEST_IRQ_NUMBER + +This register contains the triggered ID interrupt. + +Admissible values: + +====== =========== +Legacy 0 +MSI [1 .. 32] +MSI-X [1 .. 2048] +====== =========== -- cgit v1.3.1