From 0d6526f82c3cdefcca47f73f5fc08dc6f335eac6 Mon Sep 17 00:00:00 2001 From: Tim Chen Date: Mon, 21 Sep 2026 17:37:22 -0700 Subject: sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling bug alb_break_llc() decides whether to break LLC preference during active load balance. It does so by testing that every runnable fair task on the source rq prefers its LLC: env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable But the two counters cover different sets. nr_pref_llc_running is updated in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued, so it follows queued tasks. h_nr_runnable is updated in set_delayed()/ clear_delayed() and drops delay-dequeued tasks. So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks, alb_break_llc() returns false, and active balance is free to pull a task off its preferred LLC. Active balance only moves runnable tasks, and this is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB skips the per-task test in can_migrate_task(). The runnable set is the one we want. Fix it on the counter side. A task should be counted in nr_pref_llc_running exactly while it is both queued on its preferred LLC (pref_llc_queued) and runnable (!sched_delayed). Define that membership once in task_pref_llc_runnable(), and adjust the counter only through pref_llc_running_inc()/pref_llc_running_dec() from the four sites that change either input: account_llc_enqueue(), account_llc_dequeue(), set_delayed() and clear_delayed(). Gating every update on the same predicate keeps the delay, wake and dequeue paths from double-counting or underflowing; see the comments at those sites for the ordering. nr_llc_running and sd->llc_counts are not touched and stay on queued semantics. Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC") Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/ Reported-by: Zhan Xusheng Suggested-by: Chen Yu Signed-off-by: Tim Chen Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Kayra Cizmeci Cc: # v7.2.x Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com --- Documentation/PCI/endpoint/pci-test-function.rst | 103 +++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 Documentation/PCI/endpoint/pci-test-function.rst (limited to 'Documentation/PCI/endpoint/pci-test-function.rst') diff --git a/Documentation/PCI/endpoint/pci-test-function.rst b/Documentation/PCI/endpoint/pci-test-function.rst new file mode 100644 index 000000000..3c8521d7a --- /dev/null +++ b/Documentation/PCI/endpoint/pci-test-function.rst @@ -0,0 +1,103 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +PCI Test Function +================= + +:Author: Kishon Vijay Abraham I + +Traditionally PCI RC has always been validated by using standard +PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards. +However with the addition of EP-core in linux kernel, it is possible +to configure a PCI controller that can operate in EP mode to work as +a test device. + +The PCI endpoint test device is a virtual device (defined in software) +used to test the endpoint functionality and serve as a sample driver +for other PCI endpoint devices (to use the EP framework). + +The PCI endpoint test device has the following registers: + + 1) PCI_ENDPOINT_TEST_MAGIC + 2) PCI_ENDPOINT_TEST_COMMAND + 3) PCI_ENDPOINT_TEST_STATUS + 4) PCI_ENDPOINT_TEST_SRC_ADDR + 5) PCI_ENDPOINT_TEST_DST_ADDR + 6) PCI_ENDPOINT_TEST_SIZE + 7) PCI_ENDPOINT_TEST_CHECKSUM + 8) PCI_ENDPOINT_TEST_IRQ_TYPE + 9) PCI_ENDPOINT_TEST_IRQ_NUMBER + +* PCI_ENDPOINT_TEST_MAGIC + +This register will be used to test BAR0. A known pattern will be written +and read back from MAGIC register to verify BAR0. + +* PCI_ENDPOINT_TEST_COMMAND + +This register will be used by the host driver to indicate the function +that the endpoint device must perform. + +======== ================================================================ +Bitfield Description +======== ================================================================ +Bit 0 raise legacy IRQ +Bit 1 raise MSI IRQ +Bit 2 raise MSI-X IRQ +Bit 3 read command (read data from RC buffer) +Bit 4 write command (write data to RC buffer) +Bit 5 copy command (copy data from one RC buffer to another RC buffer) +======== ================================================================ + +* PCI_ENDPOINT_TEST_STATUS + +This register reflects the status of the PCI endpoint device. + +======== ============================== +Bitfield Description +======== ============================== +Bit 0 read success +Bit 1 read fail +Bit 2 write success +Bit 3 write fail +Bit 4 copy success +Bit 5 copy fail +Bit 6 IRQ raised +Bit 7 source address is invalid +Bit 8 destination address is invalid +======== ============================== + +* PCI_ENDPOINT_TEST_SRC_ADDR + +This register contains the source address (RC buffer address) for the +COPY/READ command. + +* PCI_ENDPOINT_TEST_DST_ADDR + +This register contains the destination address (RC buffer address) for +the COPY/WRITE command. + +* PCI_ENDPOINT_TEST_IRQ_TYPE + +This register contains the interrupt type (Legacy/MSI) triggered +for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands. + +Possible types: + +====== == +Legacy 0 +MSI 1 +MSI-X 2 +====== == + +* PCI_ENDPOINT_TEST_IRQ_NUMBER + +This register contains the triggered ID interrupt. + +Admissible values: + +====== =========== +Legacy 0 +MSI [1 .. 32] +MSI-X [1 .. 2048] +====== =========== -- cgit v1.3.1