From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/ABI/testing/sysfs-tty | 166 ++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-tty (limited to 'Documentation/ABI/testing/sysfs-tty') diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty new file mode 100644 index 000000000..895c47f05 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-tty @@ -0,0 +1,166 @@ +What: /sys/class/tty/console/active +Date: Nov 2010 +Contact: Kay Sievers +Description: + Shows the list of currently configured + console devices, like 'tty1 ttyS0'. + The last entry in the file is the active + device connected to /dev/console. + The file supports poll() to detect virtual + console switches. + +What: /sys/class/tty/tty/active +Date: Nov 2010 +Contact: Kay Sievers +Description: + Shows the currently active virtual console + device, like 'tty1'. + The file supports poll() to detect virtual + console switches. + +What: /sys/class/tty/ttyS/uartclk +Date: Sep 2012 +Contact: Tomas Hlavacek +Description: + Shows the current uartclk value associated with the + UART port in serial_core, that is bound to TTY like ttyS0. + uartclk = 16 * baud_base + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/type +Date: October 2012 +Contact: Alan Cox +Description: + Shows the current tty type for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/line +Date: October 2012 +Contact: Alan Cox +Description: + Shows the current tty line number for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/port +Date: October 2012 +Contact: Alan Cox +Description: + Shows the current tty port I/O address for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/irq +Date: October 2012 +Contact: Alan Cox +Description: + Shows the current primary interrupt for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/flags +Date: October 2012 +Contact: Alan Cox +Description: + Show the tty port status flags for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/xmit_fifo_size +Date: October 2012 +Contact: Alan Cox +Description: + Show the transmit FIFO size for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/close_delay +Date: October 2012 +Contact: Alan Cox +Description: + Show the closing delay time for this port in centiseconds. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/closing_wait +Date: October 2012 +Contact: Alan Cox +Description: + Show the close wait time for this port in centiseconds. + + Waiting forever is represented as 0. If waiting on close is + disabled then the value is 65535. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/custom_divisor +Date: October 2012 +Contact: Alan Cox +Description: + Show the custom divisor if any that is set on this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/io_type +Date: October 2012 +Contact: Alan Cox +Description: + Show the I/O type that is to be used with the iomem base + address. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/iomem_base +Date: October 2012 +Contact: Alan Cox +Description: + The I/O memory base for this port. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/iomem_reg_shift +Date: October 2012 +Contact: Alan Cox +Description: + Show the register shift indicating the spacing to be used + for accesses on this iomem address. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS/rx_trig_bytes +Date: May 2014 +Contact: Yoshihiro YUNOMAE +Description: + Shows current RX interrupt trigger bytes or sets the + user specified value to change it for the FIFO buffer. + Users can show or set this value regardless of opening the + serial device file or not. + + The RX trigger can be set one of four kinds of values for UART + serials. When users input a meaning less value to this I/F, + the RX trigger is changed to the nearest lower value for the + device specification. For example, when user sets 7bytes on + 16550A, which has 1/4/8/14 bytes trigger, the RX trigger is + automatically changed to 4 bytes. + +What: /sys/class/tty/ttyS/console +Date: February 2020 +Contact: Andy Shevchenko +Description: + Allows user to detach or attach back the given device as + kernel console. It shows and accepts a boolean variable. -- cgit v1.3.1