From e1c13aed4a1641550e8c9518c96f016e1d52d09b Mon Sep 17 00:00:00 2001 From: Yijie Yang Date: Tue, 11 Aug 2026 16:46:47 +0800 Subject: dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible Add the Qualcomm Maili SoC compatible string for the CPU bandwidth monitor (BWMONv4). This falls back to the sdm845-bwmon compatible, consistent with the existing pattern used by other recent SoCs such as sm8750 and kaanapali. Signed-off-by: Yijie Yang Acked-by: Krzysztof Kozlowski Reviewed-by: Jingyi Wang Link: https://patch.msgid.link/20260811-bwmon-v2-1-80f7f150ab9e@oss.qualcomm.com Signed-off-by: Rob Herring (Arm) --- Documentation/ABI/testing/sysfs-class-rapidio | 59 +++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-rapidio (limited to 'Documentation/ABI/testing/sysfs-class-rapidio') diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio new file mode 100644 index 000000000..81e091455 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rapidio @@ -0,0 +1,59 @@ +What: /sys/class/rapidio_port +Description: + On-chip RapidIO controllers and PCIe-to-RapidIO bridges + (referenced as "Master Port" or "mport") are presented in sysfs + as the special class of devices: "rapidio_port". + The /sys/class/rapidio_port subdirectory contains individual + subdirectories named as "rapidioN" where N = mport ID registered + with RapidIO subsystem. + + NOTE: An mport ID is not a RapidIO destination ID assigned to a + given local mport device. + +What: /sys/class/rapidio_port/rapidio/sys_size +Date: Apr, 2014 +KernelVersion: v3.15 +Contact: Matt Porter , + Alexandre Bounine +Description: + (RO) reports RapidIO common transport system size: + + 0 = small (8-bit destination ID, max. 256 devices), + + 1 = large (16-bit destination ID, max. 65536 devices). + +What: /sys/class/rapidio_port/rapidio/port_destid +Date: Apr, 2014 +KernelVersion: v3.15 +Contact: Matt Porter , + Alexandre Bounine +Description: + +(RO) reports RapidIO destination ID assigned to the given +RapidIO mport device. If value 0xFFFFFFFF is returned this means +that no valid destination ID have been assigned to the mport +(yet). Normally, before enumeration/discovery have been executed +only fabric enumerating mports have a valid destination ID +assigned to them using "hdid=..." rapidio module parameter. + +After enumeration or discovery was performed for a given mport device, +the corresponding subdirectory will also contain subdirectories for each +child RapidIO device connected to the mport. + +The example below shows mport device subdirectory with several child RapidIO +devices attached to it:: + + [rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l + total 0 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 + lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 + -r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid + drwxr-xr-x 2 root root 0 Feb 11 15:11 power + lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port + -r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size + -rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent -- cgit v1.3.1