From e1c13aed4a1641550e8c9518c96f016e1d52d09b Mon Sep 17 00:00:00 2001 From: Yijie Yang Date: Tue, 11 Aug 2026 16:46:47 +0800 Subject: dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible Add the Qualcomm Maili SoC compatible string for the CPU bandwidth monitor (BWMONv4). This falls back to the sdm845-bwmon compatible, consistent with the existing pattern used by other recent SoCs such as sm8750 and kaanapali. Signed-off-by: Yijie Yang Acked-by: Krzysztof Kozlowski Reviewed-by: Jingyi Wang Link: https://patch.msgid.link/20260811-bwmon-v2-1-80f7f150ab9e@oss.qualcomm.com Signed-off-by: Rob Herring (Arm) --- .../ABI/testing/sysfs-class-led-trigger-tty | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-tty (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-tty') diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty new file mode 100644 index 000000000..308fbc362 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -0,0 +1,62 @@ +What: /sys/class/leds//ttyname +Date: Dec 2020 +KernelVersion: 5.10 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the tty device name of the triggering tty + +What: /sys/class/leds//rx +Date: February 2024 +KernelVersion: 6.8 +Description: + Signal reception (rx) of data on the named tty device. + If set to 0, the LED will not blink on reception. + If set to 1 (default), the LED will blink on reception. + +What: /sys/class/leds//tx +Date: February 2024 +KernelVersion: 6.8 +Description: + Signal transmission (tx) of data on the named tty device. + If set to 0, the LED will not blink on transmission. + If set to 1 (default), the LED will blink on transmission. + +What: /sys/class/leds//cts +Date: February 2024 +KernelVersion: 6.8 +Description: + CTS = Clear To Send + DCE is ready to accept data from the DTE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CTS. + If set to 1, the LED will evaluate CTS. + +What: /sys/class/leds//dsr +Date: February 2024 +KernelVersion: 6.8 +Description: + DSR = Data Set Ready + DCE is ready to receive and send data. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate DSR. + If set to 1, the LED will evaluate DSR. + +What: /sys/class/leds//dcd +Date: February 2024 +KernelVersion: 6.8 +Description: + DCD = Data Carrier Detect + DTE is receiving a carrier from the DCE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CAR (DCD). + If set to 1, the LED will evaluate CAR (DCD). + +What: /sys/class/leds//rng +Date: February 2024 +KernelVersion: 6.8 +Description: + RNG = Ring Indicator + DCE has detected an incoming ring signal on the telephone + line. If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate RNG. + If set to 1, the LED will evaluate RNG. -- cgit v1.3.1