From 4352b8aee98005853aa63f57d6377282de17a33f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Aug 2026 13:28:57 -0700 Subject: Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull I3C updates from Alexandre Belloni: "A new driver this cycle, for the AMD AXI I3C controller. There are also new features such as IBI wakeup support, SETAASA device discovery and ACPI support for the the DAA methods, meaning we can now communicate with the SPD devices on DDR5 modules. New driver: - AMD AXI I3C master controller Subsystem: - I3C Common Command Code (CCC) handling improvements, especially around GET CCCs - SETAASA device discovery support - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as I2C devices on I3C bus - IBI-based wakeup support Drivers: - dw: SETAASA support - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support, PIO queue management support for HCI v1.2 - renesas: improve suspend to RAM support, add runtime PM support" * tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits) i3c: dw: reduce do_daa time if there's no client i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2 i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode i3c: dw: rename "pclk" to "apb" to match dt-binding i3c: dw: make struct dw_i3c_cmd smaller i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding i3c: renesas: Don't register devices when ENTDAA times out i3c: master: dw-i3c-master: fix OD timing for first broadcast i3c: mipi-i3c-hci: Advertise IBI wakeup capability i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI i3c: master: Reject IBI requests from non-IBI-capable devices i3c: master: Add helper to query bus wakeup requirements i3c: master: Report wakeup events for IBIs i3c: master: Support IBI-based wakeup capability i3c: master: Fix potential UAF in i3c_device_match() i3c: master: Fix potential UAF in i3c_device_uevent() i3c: Make dev->desc locking assumptions explicit i3c: master: Fix use-after-free of master->this ... --- .../ABI/testing/sysfs-class-led-trigger-tty | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-tty (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-tty') diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty new file mode 100644 index 000000000..308fbc362 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -0,0 +1,62 @@ +What: /sys/class/leds//ttyname +Date: Dec 2020 +KernelVersion: 5.10 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the tty device name of the triggering tty + +What: /sys/class/leds//rx +Date: February 2024 +KernelVersion: 6.8 +Description: + Signal reception (rx) of data on the named tty device. + If set to 0, the LED will not blink on reception. + If set to 1 (default), the LED will blink on reception. + +What: /sys/class/leds//tx +Date: February 2024 +KernelVersion: 6.8 +Description: + Signal transmission (tx) of data on the named tty device. + If set to 0, the LED will not blink on transmission. + If set to 1 (default), the LED will blink on transmission. + +What: /sys/class/leds//cts +Date: February 2024 +KernelVersion: 6.8 +Description: + CTS = Clear To Send + DCE is ready to accept data from the DTE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CTS. + If set to 1, the LED will evaluate CTS. + +What: /sys/class/leds//dsr +Date: February 2024 +KernelVersion: 6.8 +Description: + DSR = Data Set Ready + DCE is ready to receive and send data. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate DSR. + If set to 1, the LED will evaluate DSR. + +What: /sys/class/leds//dcd +Date: February 2024 +KernelVersion: 6.8 +Description: + DCD = Data Carrier Detect + DTE is receiving a carrier from the DCE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CAR (DCD). + If set to 1, the LED will evaluate CAR (DCD). + +What: /sys/class/leds//rng +Date: February 2024 +KernelVersion: 6.8 +Description: + RNG = Ring Indicator + DCE has detected an incoming ring signal on the telephone + line. If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate RNG. + If set to 1, the LED will evaluate RNG. -- cgit v1.3.1