From 7e61560628d17ea6b1d8ee370f6d42694cff8758 Mon Sep 17 00:00:00 2001 From: Ulises Mendez Martinez Date: Fri, 4 Sep 2026 15:07:09 +0000 Subject: objtool: Validate disassembler headers in libopcodes probe commit 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries") tested for libopcodes availability by linking a test snippet with a forward declaration of disassemble_init_for_target(). However, testing symbol linkage with an extern declaration only verifies the presence of the library (.so/.a) and bypasses checking for development headers (binutils-dev). On systems where libopcodes is present without development headers installed, the probe succeeds, enabling BUILD_DISAS. Subsequent compilation of objtool then fails: fatal error: 'bfd.h' file not found 113 | #include Additionally, the probe invokes $(HOSTCC) without $(HOSTCFLAGS), ignoring any sysroot or include flags specified for the host compiler. Fix this by including and directly in the test snippet, passing $(HOSTCFLAGS) so host compiler options are respected, and defining PACKAGE="objtool" to satisfy the configuration check in . Fixes: 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries") Fixes: 436326bc525d ("objtool: fix build failure due to missing libopcodes check") Reported-by: Alice Ryhl Assisted-by: Antigravity:Gemini-Next Signed-off-by: Ulises Mendez Martinez Link: https://patch.msgid.link/20260904150710.2997558-1-umendez@google.com Signed-off-by: Josh Poimboeuf --- .../ABI/testing/sysfs-class-led-trigger-netdev | 192 +++++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-netdev (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-netdev') diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev new file mode 100644 index 000000000..ed46b37ab --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -0,0 +1,192 @@ +What: /sys/class/leds//device_name +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the network device name to monitor. + +What: /sys/class/leds//interval +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the duration of the LED blink in milliseconds. + Defaults to 50 ms. + + When offloaded is true, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + +What: /sys/class/leds//link +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + of the named network device. + Setting this value also immediately changes the LED state. + + +What: /sys/class/leds//tx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal transmission of data on the named network device. + + If set to 0 (default), the LED will not blink on transmission. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal transmission. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds//rx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal reception of data on the named network device. + + If set to 0 (default), the LED will not blink on reception. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal reception. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds//offloaded +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are offloaded to + hardware or whether software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED blinking in requested mode is offloaded to + hardware. + +What: /sys/class/leds//link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10Mbps link speed. + +What: /sys/class/leds//link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 100Mbps link speed. + +What: /sys/class/leds//link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 1000Mbps link speed. + +What: /sys/class/leds//link_2500 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 2500Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 2500Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 2500Mbps link speed. + +What: /sys/class/leds//link_5000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 5000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 5000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 5000Mbps link speed. + +What: /sys/class/leds//link_10000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10000Mbps link speed. + +What: /sys/class/leds//half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds//full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. -- cgit v1.3.1