From 5febf432df1cfa5b25d99b54c32103fafbdd0eb9 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Sun, 16 Aug 2026 15:32:33 +0200 Subject: kbuild: rust: keep Rust objects out of Clang LTO with inline helpers Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit `objtool` errors such as: vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a: can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd The reason is that in such builds, the Clang invocation that compiles the combined Rust plus helpers bitcode emits LLVM bitcode (again) -- the final code generation happens in the linker's LTO step, which the `-mllvm` trap options passed to Clang do not reach. This, in turn, means that unreachable traps are missing, and the impossible paths do not merely fallthrough to the next symbol, but past the end of their own section, since LTO builds place each function in its own section. Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always emits machine code directly, with the traps in place. Assisted-by: LLM Cc: Gary Guo Cc: Boqun Feng Cc: Alice Ryhl Cc: Matthew Maurer Cc: Josh Poimboeuf Cc: Peter Zijlstra Cc: stable@vger.kernel.org Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust") Acked-by: Gary Guo Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda --- .../ABI/testing/sysfs-class-led-trigger-netdev | 192 +++++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-netdev (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-netdev') diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev new file mode 100644 index 000000000..ed46b37ab --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -0,0 +1,192 @@ +What: /sys/class/leds//device_name +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the network device name to monitor. + +What: /sys/class/leds//interval +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the duration of the LED blink in milliseconds. + Defaults to 50 ms. + + When offloaded is true, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + +What: /sys/class/leds//link +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + of the named network device. + Setting this value also immediately changes the LED state. + + +What: /sys/class/leds//tx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal transmission of data on the named network device. + + If set to 0 (default), the LED will not blink on transmission. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal transmission. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds//rx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal reception of data on the named network device. + + If set to 0 (default), the LED will not blink on reception. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal reception. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds//offloaded +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are offloaded to + hardware or whether software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED blinking in requested mode is offloaded to + hardware. + +What: /sys/class/leds//link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10Mbps link speed. + +What: /sys/class/leds//link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 100Mbps link speed. + +What: /sys/class/leds//link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 1000Mbps link speed. + +What: /sys/class/leds//link_2500 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 2500Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 2500Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 2500Mbps link speed. + +What: /sys/class/leds//link_5000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 5000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 5000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 5000Mbps link speed. + +What: /sys/class/leds//link_10000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10000Mbps link speed. + +What: /sys/class/leds//half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds//full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. -- cgit v1.3.1