From f146c7bc85a51f95c05e0f8173d484eb301ece78 Mon Sep 17 00:00:00 2001 From: Danilo Krummrich Date: Thu, 13 Aug 2026 18:52:04 +0200 Subject: PCI: Add pci_irq_type() to query the allocated interrupt type Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX based on the interrupt type the PCI core selected after pci_alloc_irq_vectors(). Several drivers already open-code this check against pdev->msix_enabled and pdev->msi_enabled, or even open code this helper [1]. A common helper avoids the duplication and keeps drivers from accessing the bitfield directly (see also [2]). Acked-by: Bjorn Helgaas Tested-by: John Hubbard Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1] Inspired-by: John Hubbard Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2] Reviewed-by: Gary Guo Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org [ Add missing pci_irq_type() stub for CONFIG_PCI=n. ] Signed-off-by: Danilo Krummrich --- Documentation/ABI/testing/sysfs-class-led-flash | 89 +++++++++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-flash (limited to 'Documentation/ABI/testing/sysfs-class-led-flash') diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash new file mode 100644 index 000000000..11e5677c3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-flash @@ -0,0 +1,89 @@ +What: /sys/class/leds//flash_brightness +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read/write + Set the brightness of this LED in the flash strobe mode, in + microamperes. The file is created only for the flash LED devices + that support setting flash brightness. + + The value is between 0 and + /sys/class/leds//max_flash_brightness. + +What: /sys/class/leds//max_flash_brightness +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read only + Maximum brightness level for this LED in the flash strobe mode, + in microamperes. + +What: /sys/class/leds//flash_timeout +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read/write + Hardware timeout for flash, in microseconds. The flash strobe + is stopped after this period of time has passed from the start + of the strobe. The file is created only for the flash LED + devices that support setting flash timeout. + +What: /sys/class/leds//max_flash_timeout +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read only + Maximum flash timeout for this LED, in microseconds. + +What: /sys/class/leds//flash_strobe +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read/write + Flash strobe state. When written with 1 it triggers flash strobe + and when written with 0 it turns the flash off. + + On read 1 means that flash is currently strobing and 0 means + that flash is off. + +What: /sys/class/leds//flash_fault +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski +Description: read only + Space separated list of flash faults that may have occurred. + Flash faults are re-read after strobing the flash. Possible + flash faults: + + * led-over-voltage + flash controller voltage to the flash LED + has exceeded the limit specific to the flash controller + * flash-timeout-exceeded + the flash strobe was still on when + the timeout set by the user has expired; not all flash + controllers may set this in all such conditions + * controller-over-temperature + the flash controller has + overheated + * controller-short-circuit + the short circuit protection + of the flash controller has been triggered + * led-power-supply-over-current + current in the LED power + supply has exceeded the limit specific to the flash + controller + * indicator-led-fault + the flash controller has detected + a short or open circuit condition on the indicator LED + * led-under-voltage + flash controller voltage to the flash + LED has been below the minimum limit specific to + the flash + * controller-under-voltage + the input voltage of the flash + controller is below the limit under which strobing the + flash at full current will not be possible; + the condition persists until this flag is no longer set + * led-over-temperature + the temperature of the LED has exceeded + its allowed upper limit -- cgit v1.3.1