From 0d6526f82c3cdefcca47f73f5fc08dc6f335eac6 Mon Sep 17 00:00:00 2001 From: Tim Chen Date: Mon, 21 Sep 2026 17:37:22 -0700 Subject: sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling bug alb_break_llc() decides whether to break LLC preference during active load balance. It does so by testing that every runnable fair task on the source rq prefers its LLC: env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable But the two counters cover different sets. nr_pref_llc_running is updated in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued, so it follows queued tasks. h_nr_runnable is updated in set_delayed()/ clear_delayed() and drops delay-dequeued tasks. So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks, alb_break_llc() returns false, and active balance is free to pull a task off its preferred LLC. Active balance only moves runnable tasks, and this is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB skips the per-task test in can_migrate_task(). The runnable set is the one we want. Fix it on the counter side. A task should be counted in nr_pref_llc_running exactly while it is both queued on its preferred LLC (pref_llc_queued) and runnable (!sched_delayed). Define that membership once in task_pref_llc_runnable(), and adjust the counter only through pref_llc_running_inc()/pref_llc_running_dec() from the four sites that change either input: account_llc_enqueue(), account_llc_dequeue(), set_delayed() and clear_delayed(). Gating every update on the same predicate keeps the delay, wake and dequeue paths from double-counting or underflowing; see the comments at those sites for the ordering. nr_llc_running and sd->llc_counts are not touched and stay on queued semantics. Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC") Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/ Reported-by: Zhan Xusheng Suggested-by: Chen Yu Signed-off-by: Tim Chen Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Reviewed-by: Kayra Cizmeci Cc: # v7.2.x Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com --- Documentation/ABI/testing/sysfs-class-bdi | 134 ++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-bdi (limited to 'Documentation/ABI/testing/sysfs-class-bdi') diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi new file mode 100644 index 000000000..0d2abd88a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -0,0 +1,134 @@ +What: /sys/class/bdi// +Date: January 2008 +Contact: Peter Zijlstra +Description: + +Provide a place in sysfs for the backing_dev_info object. This allows +setting and retrieving various BDI specific variables. + +The identifier can be either of the following: + +MAJOR:MINOR + + Device number for block devices, or value of st_dev on + non-block filesystems which provide their own BDI, such as NFS + and FUSE. + +MAJOR:MINOR-fuseblk + + Value of st_dev on fuseblk filesystems. + +default + + The default backing dev, used for non-block device backed + filesystems which do not provide their own BDI. + +What: /sys/class/bdi//read_ahead_kb +Date: January 2008 +Contact: Peter Zijlstra +Description: + Size of the read-ahead window in kilobytes + + (read-write) +What: /sys/class/bdi//min_ratio +Date: January 2008 +Contact: Peter Zijlstra +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_ratio' parameter allows assigning a minimum + percentage of the write-back cache to a particular device. + For example, this is useful for providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi//min_ratio_fine +Date: November 2022 +Contact: Stefan Roesch +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_ratio_fine' parameter allows assigning a minimum reserve + of the write-back cache to a particular device. The value is + expressed as part of 1 million. For example, this is useful for + providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi//max_ratio +Date: January 2008 +Contact: Peter Zijlstra +Description: + Allows limiting a particular device to use not more than the + given percentage of the write-back cache. This is useful in + situations where we want to avoid one device taking all or + most of the write-back cache. For example in case of an NFS + mount that is prone to get stuck, or a FUSE mount which cannot + be trusted to play fair. + + (read-write) + +What: /sys/class/bdi//max_ratio_fine +Date: November 2022 +Contact: Stefan Roesch +Description: + Allows limiting a particular device to use not more than the + given value of the write-back cache. The value is given as part + of 1 million. This is useful in situations where we want to avoid + one device taking all or most of the write-back cache. For example + in case of an NFS mount that is prone to get stuck, or a FUSE mount + which cannot be trusted to play fair. + + (read-write) + +What: /sys/class/bdi//min_bytes +Date: October 2022 +Contact: Stefan Roesch +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_bytes' parameter allows assigning a minimum + percentage of the write-back cache to a particular device + expressed in bytes. + For example, this is useful for providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi//max_bytes +Date: October 2022 +Contact: Stefan Roesch +Description: + Allows limiting a particular device to use not more than the + given 'max_bytes' of the write-back cache. This is useful in + situations where we want to avoid one device taking all or + most of the write-back cache. For example in case of an NFS + mount that is prone to get stuck, a FUSE mount which cannot be + trusted to play fair, or a nbd device. + + (read-write) + +What: /sys/class/bdi//strict_limit +Date: October 2022 +Contact: Stefan Roesch +Description: + Forces per-BDI checks for the share of given device in the write-back + cache even before the global background dirty limit is reached. This + is useful in situations where the global limit is much higher than + affordable for given relatively slow (or untrusted) device. Turning + strictlimit on has no visible effect if max_ratio is equal to 100%. + + (read-write) +What: /sys/class/bdi//stable_pages_required +Date: January 2008 +Contact: Peter Zijlstra +Description: + If set, the backing device requires that all pages comprising a write + request must not be changed until writeout is complete. + + (read-only) -- cgit v1.3.1