From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- Documentation/ABI/testing/sysfs-class-backlight | 186 ++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-backlight (limited to 'Documentation/ABI/testing/sysfs-class-backlight') diff --git a/Documentation/ABI/testing/sysfs-class-backlight b/Documentation/ABI/testing/sysfs-class-backlight new file mode 100644 index 000000000..c453646b0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight @@ -0,0 +1,186 @@ +What: /sys/class/backlight//scale +Date: July 2019 +KernelVersion: 5.4 +Contact: Daniel Thompson +Description: + Description of the scale of the brightness curve. + + The human eye senses brightness approximately logarithmically, + hence linear changes in brightness are perceived as being + non-linear. To achieve a linear perception of brightness changes + controls like sliders need to apply a logarithmic mapping for + backlights with a linear brightness curve. + + Possible values of the attribute are: + + unknown + The scale of the brightness curve is unknown. + + linear + The brightness changes linearly with each step. Brightness + controls should apply a logarithmic mapping for a linear + perception. + + non-linear + The brightness changes non-linearly with each step. Brightness + controls should use a linear mapping for a linear perception. + +What: /sys/class/backlight//ambient_light_level +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich +Description: + (RO) Get conversion value of the light sensor. + + The value is automatically updated every 80 ms when the + light sensor is enabled. + + The value range is device-driver specific: + + For ADP8870: + + It returns integer between 0 (dark) and 8000 (max ambient + brightness). + + For ADP8860: + + It returns a 13-bits integer. + +What: /sys/class/backlight//ambient_light_zone +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich , + device-drivers-devel@blackfin.uclinux.org + +Description: + (RW) Read or write the specific brightness level at which the + backlight operates. + + The value meaning is device-driver specific: + + For ADP8860: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: dark + == ========================== + + For ADP8870: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: office + 4 Level 4: indoor + 5 Level 5: dark + == ========================== + + Writing 0 returns to normal/automatic ambient light level + operation. + + It can be enabled by writing the value stored in + /sys/class/backlight//max_brightness to + /sys/class/backlight//brightness. + +What: /sys/class/backlight//_max +Date: Sep, 2009 +KernelVersion: v2.6.32 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the maximum brightness for + on this . Values are between 0 and 127. This file + will also show the brightness level stored for this + . + + The is device-driver specific: + + For ADP5520 and ADP5501, can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + daylight /sys/class/backlight//daylight_max + office /sys/class/backlight//office_max + dark /sys/class/backlight//dark_max + =========== ================================================ + + For ADP8860, can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight//l1_daylight_max + l2_office /sys/class/backlight//l2_office_max + l3_dark /sys/class/backlight//l3_dark_max + =========== ================================================ + + For ADP8870, can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight//l1_daylight_max + l2_bright /sys/class/backlight//l2_bright_max + l3_office /sys/class/backlight//l3_office_max + l4_indoor /sys/class/backlight//l4_indoor_max + l5_dark /sys/class/backlight//l5_dark_max + =========== ================================================ + + See also: /sys/class/backlight//ambient_light_zone. + +What: /sys/class/backlight//_dim +Date: Sep, 2009 +KernelVersion: v2.6.32 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the dim brightness for + on this . Values are between 0 and 127, typically + set to 0. Full off when the backlight is disabled. + This file will also show the dim brightness level stored for + this . + + The is device-driver specific: + + For ADP5520 and ADP5501, can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + daylight /sys/class/backlight//daylight_dim + office /sys/class/backlight//office_dim + dark /sys/class/backlight//dark_dim + =========== ================================================ + + For ADP8860, can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight//l1_daylight_dim + l2_office /sys/class/backlight//l2_office_dim + l3_dark /sys/class/backlight//l3_dark_dim + =========== ================================================ + + For ADP8870, can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight//l1_daylight_dim + l2_bright /sys/class/backlight//l2_bright_dim + l3_office /sys/class/backlight//l3_office_dim + l4_indoor /sys/class/backlight//l4_indoor_dim + l5_dark /sys/class/backlight//l5_dark_dim + =========== ================================================ + + See also: /sys/class/backlight//ambient_light_zone. + -- cgit v1.3.1