From 4352b8aee98005853aa63f57d6377282de17a33f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Aug 2026 13:28:57 -0700 Subject: Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull I3C updates from Alexandre Belloni: "A new driver this cycle, for the AMD AXI I3C controller. There are also new features such as IBI wakeup support, SETAASA device discovery and ACPI support for the the DAA methods, meaning we can now communicate with the SPD devices on DDR5 modules. New driver: - AMD AXI I3C master controller Subsystem: - I3C Common Command Code (CCC) handling improvements, especially around GET CCCs - SETAASA device discovery support - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as I2C devices on I3C bus - IBI-based wakeup support Drivers: - dw: SETAASA support - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support, PIO queue management support for HCI v1.2 - renesas: improve suspend to RAM support, add runtime PM support" * tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits) i3c: dw: reduce do_daa time if there's no client i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2 i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode i3c: dw: rename "pclk" to "apb" to match dt-binding i3c: dw: make struct dw_i3c_cmd smaller i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding i3c: renesas: Don't register devices when ENTDAA times out i3c: master: dw-i3c-master: fix OD timing for first broadcast i3c: mipi-i3c-hci: Advertise IBI wakeup capability i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI i3c: master: Reject IBI requests from non-IBI-capable devices i3c: master: Add helper to query bus wakeup requirements i3c: master: Report wakeup events for IBIs i3c: master: Support IBI-based wakeup capability i3c: master: Fix potential UAF in i3c_device_match() i3c: master: Fix potential UAF in i3c_device_uevent() i3c: Make dev->desc locking assumptions explicit i3c: master: Fix use-after-free of master->this ... --- Documentation/ABI/testing/sysfs-block-bcache | 149 +++++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-block-bcache (limited to 'Documentation/ABI/testing/sysfs-block-bcache') diff --git a/Documentation/ABI/testing/sysfs-block-bcache b/Documentation/ABI/testing/sysfs-block-bcache new file mode 100644 index 000000000..9344a657c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-bcache @@ -0,0 +1,149 @@ +What: /sys/block//bcache/unregister +Date: November 2010 +Contact: Kent Overstreet +Description: + A write to this file causes the backing device or cache to be + unregistered. If a backing device had dirty data in the cache, + writeback mode is automatically disabled and all dirty data is + flushed before the device is unregistered. Caches unregister + all associated backing devices before unregistering themselves. + +What: /sys/block//bcache/clear_stats +Date: November 2010 +Contact: Kent Overstreet +Description: + Writing to this file resets all the statistics for the device. + +What: /sys/block//bcache/cache +Date: November 2010 +Contact: Kent Overstreet +Description: + For a backing device that has cache, a symlink to + the bcache/ dir of that cache. + +What: /sys/block//bcache/cache_hits +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: integer number of full cache hits, + counted per bio. A partial cache hit counts as a miss. + +What: /sys/block//bcache/cache_misses +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: integer number of cache misses. + +What: /sys/block//bcache/cache_hit_ratio +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: cache hits as a percentage. + +What: /sys/block//bcache/sequential_cutoff +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: Threshold past which sequential IO will + skip the cache. Read and written as bytes in human readable + units (i.e. echo 10M > sequntial_cutoff). + +What: /sys/block//bcache/bypassed +Date: November 2010 +Contact: Kent Overstreet +Description: + Sum of all reads and writes that have bypassed the cache (due + to the sequential cutoff). Expressed as bytes in human + readable units. + +What: /sys/block//bcache/writeback +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: When on, writeback caching is enabled and + writes will be buffered in the cache. When off, caching is in + writethrough mode; reads and writes will be added to the + cache but no write buffering will take place. + +What: /sys/block//bcache/writeback_running +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: when off, dirty data will not be written + from the cache to the backing device. The cache will still be + used to buffer writes until it is mostly full, at which point + writes transparently revert to writethrough mode. Intended only + for benchmarking/testing. + +What: /sys/block//bcache/writeback_delay +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: In writeback mode, when dirty data is + written to the cache and the cache held no dirty data for that + backing device, writeback from cache to backing device starts + after this delay, expressed as an integer number of seconds. + +What: /sys/block//bcache/writeback_percent +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: If nonzero, writeback from cache to + backing device only takes place when more than this percentage + of the cache is used, allowing more write coalescing to take + place and reducing total number of writes sent to the backing + device. Integer between 0 and 40. + +What: /sys/block//bcache/synchronous +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, a boolean that allows synchronous mode to be + switched on and off. In synchronous mode all writes are ordered + such that the cache can reliably recover from unclean shutdown; + if disabled bcache will not generally wait for writes to + complete but if the cache is not shut down cleanly all data + will be discarded from the cache. Should not be turned off with + writeback caching enabled. + +What: /sys/block//bcache/bucket_size +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, bucket size in human readable units, as set at + cache creation time; should match the erase block size of the + SSD for optimal performance. + +What: /sys/block//bcache/nbuckets +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, the number of usable buckets. + +What: /sys/block//bcache/tree_depth +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, height of the btree excluding leaf nodes (i.e. a + one node tree will have a depth of 0). + +What: /sys/block//bcache/btree_cache_size +Date: November 2010 +Contact: Kent Overstreet +Description: + Number of btree buckets/nodes that are currently cached in + memory; cache dynamically grows and shrinks in response to + memory pressure from the rest of the system. + +What: /sys/block//bcache/written +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, total amount of data in human readable units + written to the cache, excluding all metadata. + +What: /sys/block//bcache/btree_written +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, sum of all btree writes in human readable units. -- cgit v1.3.1