From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- Documentation/ABI/testing/debugfs-cxl | 157 ++++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 Documentation/ABI/testing/debugfs-cxl (limited to 'Documentation/ABI/testing/debugfs-cxl') diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl new file mode 100644 index 000000000..2989d4da9 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-cxl @@ -0,0 +1,157 @@ +What: /sys/kernel/debug/cxl/memX/inject_poison +Date: April, 2023 +KernelVersion: v6.4 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) When a Device Physical Address (DPA) is written to this + attribute, the memdev driver sends an inject poison command to + the device for the specified address. The DPA must be 64-byte + aligned and the length of the injected poison is 64-bytes. If + successful, the device returns poison when the address is + accessed through the CXL.mem bus. Injecting poison adds the + address to the device's Poison List and the error source is set + to Injected. In addition, the device adds a poison creation + event to its internal Informational Event log, updates the + Event Status register, and if configured, interrupts the host. + It is not an error to inject poison into an address that + already has poison present and no error is returned. If the + device returns 'Inject Poison Limit Reached' an -EBUSY error + is returned to the user. The inject_poison attribute is only + visible for devices supporting the capability. + + TEST-ONLY INTERFACE: This interface is intended for testing + and validation purposes only. It is not a data repair mechanism + and should never be used on production systems or live data. + + DATA LOSS RISK: For CXL persistent memory (PMEM) devices, + poison injection can result in permanent data loss. Injected + poison may render data permanently inaccessible even after + clearing, as the clear operation writes zeros and does not + recover original data. + + SYSTEM STABILITY RISK: For volatile memory, poison injection + can cause kernel crashes, system instability, or unpredictable + behavior if the poisoned addresses are accessed by running code + or critical kernel structures. + +What: /sys/kernel/debug/cxl/memX/clear_poison +Date: April, 2023 +KernelVersion: v6.4 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) When a Device Physical Address (DPA) is written to this + attribute, the memdev driver sends a clear poison command to + the device for the specified address. Clearing poison removes + the address from the device's Poison List and writes 0 (zero) + for 64 bytes starting at address. It is not an error to clear + poison from an address that does not have poison set. If the + device cannot clear poison from the address, -ENXIO is returned. + The clear_poison attribute is only visible for devices + supporting the capability. + + TEST-ONLY INTERFACE: This interface is intended for testing + and validation purposes only. It is not a data repair mechanism + and should never be used on production systems or live data. + + CLEAR IS NOT DATA RECOVERY: This operation writes zeros to the + specified address range and removes the address from the poison + list. It does NOT recover or restore original data that may have + been present before poison injection. Any original data at the + cleared address is permanently lost and replaced with zeros. + + CLEAR IS NOT A REPAIR MECHANISM: This interface is for testing + purposes only and should not be used as a data repair tool. + Clearing poison is fundamentally different from data recovery + or error correction. + +What: /sys/kernel/debug/cxl/regionX/inject_poison +Date: August, 2025 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) When a Host Physical Address (HPA) is written to this + attribute, the region driver translates it to a Device + Physical Address (DPA) and identifies the corresponding + memdev. It then sends an inject poison command to that memdev + at the translated DPA. Refer to the memdev ABI entry at: + /sys/kernel/debug/cxl/memX/inject_poison for the detailed + behavior. This attribute is only visible if all memdevs + participating in the region support both inject and clear + poison commands. + + TEST-ONLY INTERFACE: This interface is intended for testing + and validation purposes only. It is not a data repair mechanism + and should never be used on production systems or live data. + + DATA LOSS RISK: For CXL persistent memory (PMEM) devices, + poison injection can result in permanent data loss. Injected + poison may render data permanently inaccessible even after + clearing, as the clear operation writes zeros and does not + recover original data. + + SYSTEM STABILITY RISK: For volatile memory, poison injection + can cause kernel crashes, system instability, or unpredictable + behavior if the poisoned addresses are accessed by running code + or critical kernel structures. + +What: /sys/kernel/debug/cxl/regionX/clear_poison +Date: August, 2025 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) When a Host Physical Address (HPA) is written to this + attribute, the region driver translates it to a Device + Physical Address (DPA) and identifies the corresponding + memdev. It then sends a clear poison command to that memdev + at the translated DPA. Refer to the memdev ABI entry at: + /sys/kernel/debug/cxl/memX/clear_poison for the detailed + behavior. This attribute is only visible if all memdevs + participating in the region support both inject and clear + poison commands. + + TEST-ONLY INTERFACE: This interface is intended for testing + and validation purposes only. It is not a data repair mechanism + and should never be used on production systems or live data. + + CLEAR IS NOT DATA RECOVERY: This operation writes zeros to the + specified address range and removes the address from the poison + list. It does NOT recover or restore original data that may have + been present before poison injection. Any original data at the + cleared address is permanently lost and replaced with zeros. + + CLEAR IS NOT A REPAIR MECHANISM: This interface is for testing + purposes only and should not be used as a data repair tool. + Clearing poison is fundamentally different from data recovery + or error correction. + +What: /sys/kernel/debug/cxl/einj_types +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) Prints the CXL protocol error types made available by + the platform in the format: + + 0x + + The possible error types are (as of ACPI v6.5): + + 0x1000 CXL.cache Protocol Correctable + 0x2000 CXL.cache Protocol Uncorrectable non-fatal + 0x4000 CXL.cache Protocol Uncorrectable fatal + 0x8000 CXL.mem Protocol Correctable + 0x10000 CXL.mem Protocol Uncorrectable non-fatal + 0x20000 CXL.mem Protocol Uncorrectable fatal + + The can be written to einj_inject to inject + into a chosen dport. + +What: /sys/kernel/debug/cxl/$dport_dev/einj_inject +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Writing an integer to this file injects the corresponding + CXL protocol error into $dport_dev ($dport_dev will be a device + name from /sys/bus/pci/devices). The integer to type mapping for + injection can be found by reading from einj_types. If the dport + was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise + a CXL 2.0 error is injected. -- cgit v1.3.1