| Age | Commit message (Collapse) | Author |
|---|
|
rtw_restruct_wmm_ie() scans in_ie for a WMM IE with:
while (i < in_len) {
...
if (i + 5 < in_len && in_ie[i] == 0xDD && ...) {
...
break;
}
i += (in_ie[i + 1] + 2); /* to the next IE element */
}
When the "i + 5 < in_len" match check fails simply because i is
within 5 bytes of the end of the buffer (i.e. no WMM IE was found
near the tail of in_ie), execution falls through to
"i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len
- 1 at that point, this is a 1-byte out-of-bounds read of an
attacker-influenced IE buffer built from association/scan data.
Commit a75281626fc8f ("staging: rtl8723bs: fix potential
out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 <
in_len" guard to the match condition itself, but did not add an
equivalent guard before the fallthrough advance, so the same class
of OOB read remained reachable through the non-matching path.
Add an explicit bounds check before advancing to the next IE.
Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-4-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced.
Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"Fixes mainly for teardown and resource handling, runtime PM and
hardware-specific controller issues:
- fix debugfs use-after-free when removing the adapter
- designware: apply interrupt mask quirk for HJMC3001
- imx-lpi2c: avoid target accesses on master-only controllers
- mux: release channel node when adapter registration fails
- qcom-cci: fix autosuspend and runtime PM cleanup on removal
- qcom-geni: fix timing parameters for 32 MHz clock"
* tag 'i2c-fixes-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: core: fix debugfs UAF on adapter removal
i2c: imx-lpi2c: avoid accessing target registers on master-only controllers
i2c: qcom-cci: fix autosuspend cleanup
i2c: designware: Enable interrupt mask workaround for HJMC3001
i2c: qcom-geni: update frequency table to fix timing parameters
i2c: mux: Fix channel node leak on adapter add failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out
the name of the instance that failed, it prints "(null)". That is
because it prints "cur_str" that had already been processed by
strsep(). Print the saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events.
But if the named histogram has a variable attached, the second event
that uses the named histogram which duplicates it and needs to free
the original after duplication leaves the old variable in place and
still visible. If another histogram uses than variable, it will use
the stale one which will try to reference the freed duplicate
histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram
data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check
if it succeeded in creating a kthread. If the kthread creation were
to fail, the code will still try to call kthread_stop() on the error
returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update
the ring buffer sub-buffer size, can cause the trace_pipe read to
read stale data. Add trace_access_lock() around updating the ring
buffer sub-buffer size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which
calls free_ei(). The free_ei() will test if eventfs_inode being freed
has no children. It is a bug if it does. But on the failure case of
the creation of the "events" directory, the children lists have not
yet been initialized and the free will trigger a warning because
list_empty() on an uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and
makes sure that a created eventfs_inode has its lists initialized
upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does
not test the return of kthread_run() to see if it succeeds. Return a
failure if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state.
It makes a copy of it then updates the child's pointer to it. But if
the allocation fails, the duplication function leaves the child with
a pointer to its parent's descriptor. When the child cleans up its
data, it will free the parent's descriptor while the parent is still
using it.
In the duplication function, set the child's user_event_mm to NULL
before testing if the allocation succeeded, and when it exits it will
not free the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a
failed replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and
exits with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it
triggers a WARN_ON_ONCE() and continues normally. Instead, have it
exit with an error and a pr_warn() print instead of a full WARNING.
* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Stop remote reader update when page swap fails
tracing: Fix retry exhaustion in simple ring buffer reader swap
tracing/user_events: Clear copied tracing state before fork duplication
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
eventfs: Initialize ei->children and ei->list in init_ei()
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
tracing: Fix crash passing ERR_PTR to kthread_stop()
tracing: Fix use-after-free with same-name named triggers
tracing: Fix logged instance name on creation failure
|
|
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debugfs_start_creating+0xdb/0x1a0
debugfs_create_dir+0x24/0x350
i2c_device_probe+0x814/0xbf0
It's technically possible to create a client after i2c_deregister_clients
has run. That client will never be unregistered and make
wait_for_completion hang.
Close the window by removing the new_device attribute at the start of
i2c_del_adapter(). device_remove_file() will drain any clients left.
Fixes: 73febd775bdb ("i2c: create debugfs entry per adapter")
Reported-by: syzbot+23ad911c819b923238b7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=23ad911c819b923238b7
Signed-off-by: Vasileios Almpanis <vasilisalmpanis@gmail.com>
Cc: <stable@vger.kernel.org> # v6.8+
Tested-by: syzbot+23ad911c819b923238b7@syzkaller.appspotmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260812-i2c-v2-1-5efaab4c3334@gmail.com
|
|
Not all LPI2C controller instances implement the Target block.
Since commit 90311787f483 ("i2c: imx-lpi2c: reset controller in
probe stage"), the driver unconditionally resets both the Master
and Target blocks during probe.
On controllers that do not support target mode, accessing the
Target registers triggers an asynchronous SError and prevents the
driver from probing successfully. For example on i.MX8QM:
SError Interrupt on CPU2, code 0x00000000bf000002 -- SError
Hardware name: Freescale i.MX8QM MEK (DT)
pc : lpi2c_imx_probe+0x280/0x594
lr : lpi2c_imx_probe+0x224/0x594
Kernel panic - not syncing: Asynchronous SError Interrupt
The VERID register is implemented in the Master block and can be
safely accessed on all controller variants. Its FEATURE field
indicates whether target mode is supported.
Read VERID during probe and use it to determine whether the
Target block is present. Only access Target registers when target
mode is supported and reject target registration requests with
-EOPNOTSUPP otherwise.
Fixes: 90311787f483 ("i2c: imx-lpi2c: reset controller in probe stage")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260803032705.2250373-1-carlos.song@oss.nxp.com
|
|
cci_probe() calls pm_runtime_use_autosuspend(), but the remove path
does not call the matching pm_runtime_dont_use_autosuspend() before
disabling runtime PM.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without undoing the autosuspend setting during
teardown, this reference is not dropped and usage_count remains
unbalanced.
Use devm_pm_runtime_set_active_enabled() to manage the runtime PM
state. Its managed cleanup disables autosuspend and runtime PM and
restores the suspended state on probe failure and driver removal.
Remove the now redundant manual runtime PM cleanup.
This issue was found by manual code inspection.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260812094425.3515179-1-lgs201920130244@gmail.com
|
|
On HJMicro ARM64 servers, the DesignWare I2C controller does not
retrigger a pending interrupt if the interrupt status changes after
the current status bits have been cleared.
The issue is exposed under heavy system load when the corresponding
SPI is routed across sockets to a core in the remote socket. The
interrupt is then lost and the I2C transfer times out.
Enable ACCESS_INTR_MASK for HJMC3001. This toggles DW_IC_INTR_MASK
before returning from the interrupt handler and retriggers any
pending interrupt.
Fixes: 6816ce57c479 ("i2c: designware: Add a new ACPI HID for HJMC01 I2C controller")
Signed-off-by: Hongbo Yao <andy.xu@hj-micro.com>
Cc: <stable@vger.kernel.org> # v6.13+
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260826070547.268672-1-andy.xu@hj-micro.com
|
|
In IPQ5424, to meet the setup and hold timing requirements in the
standard mode, update the frequency table with the values recommended by
HW design team.
Also remove the stray space in the I2C_MAX_FAST_MODE_FREQ entry.
Fixes: 85c34532849d ("i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates")
Fixes: 506bb2ab0075 ("i2c: qcom-geni: Support systems with 32MHz serial engine clock")
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260812-ipq5424_i2c_scl_updates-v2-1-e09cd39d01d7@oss.qualcomm.com
|
|
i2c_mux_add_adapter() takes a reference to the Device Tree channel node
before registering the new adapter. If adapter registration fails, the
error path frees the private data without dropping that reference.
Release the channel node before freeing the private data.
Fixes: bc45449b1444 ("i2c/of: Automatically populate i2c mux busses from device tree data.")
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
Cc: <stable@vger.kernel.org> # v3.5+
Acked-by: Peter Rosin <peda@lysator.liu.se>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/b3e46bbee781b3cb4029aca9a71316cc5e36dc17.1787502619.git.ahmadexp@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Fixes and cleanups around probe error handling, resource management
and a minor Rust cleanup.
Drivers:
- several drivers: drop duplicate IRQ error reporting
- imx-lpi2c: improve probe initialization and error cleanup
- mxs: fix DMA channel leak on probe failure
- ocores: fix clock cleanup on resume failure
- rcar: handle reset controllers without status support
Muxes:
- demux-pinctrl: fix OF node leak on allocation failure
Rust:
- mark trivial I2cAdapter reference-counting methods inline"
* tag 'i2c-7.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: rust: mark I2cAdapter methods as inline
i2c: rcar: fix reset handling for Gen5
i2c: mxs: fix DMA channel leak on probe error
i2c: mux: demux-pinctrl: fix OF node leak on kstrdup failure
i2c: ocores: Disable clock on failed resume
i2c: imx-lpi2c: reset controller in probe stage
i2c: imx-lpi2c: properly unwind resources on probe failure
i2c: busses: drop redundant dev_err_probe() around irq helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
|
|
i2c: rust: mark I2cAdapter methods as inline
A single cleanup for the Rust I2C abstractions, targeting 7.3.
`I2cAdapter::get`, `inc_ref`, and `dec_ref` are trivial wrappers around
`i2c_get_adapter`/`i2c_put_adapter` and were showing up as their own
symbols in the build. Mark them `#[inline]` so they get folded into
their callers instead.
Signed-off-by: Igor Korotin <igor.korotin@linux.dev>
* tag 'rust-i2c-for-7.3':
i2c: rust: mark I2cAdapter methods as inline
|
