| Age | Commit message (Collapse) | Author |
|---|
|
Filter enable and filter type selection masks were swapped on data
preparation for filter configuration register write. Use the correct masks
to set each property of post filter configuration.
Fixes: ff06b39be1a1 ("iio: adc: ad7173: support changing filter type")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
In case the conversion has failed or returned zero, processing *val
can lead to a division by zero. Need to check for errors, or converted
value is zero, before processing the data. In case the converted value
is zero, e.g. the Vrefint channel, this should be considered as invalid
in all cases.
Fixes: 0e346b2cfa85 ("iio: adc: stm32-adc: add vrefint calibration support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260911161555.244F31F000FF@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
If an unsupported internal channel like vddgpu is requested, the driver
prints a warning but falls through and assigns it a valid int_ch below.
This causes a problem later during setup:
stm32_adc_int_ch_enable() {
...
case STM32_ADC_INT_CH_VDDGPU:
stm32_adc_set_bits(adc, adc->cfg->regs->or_vddgpu.reg,
adc->cfg->regs->or_vddgpu.mask);
...
}
Because the register offset is uninitialized (0), this performs a
read-modify-write on offset 0, which corresponds to the ISR register.
Fix this by returning before a valid int_ch is assigned. Choice is
made to keep current driver behavior to warn about the channel name.
Fixes: cf0fb80ae167 ("iio: adc: stm32-adc: add stm32mp13 support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260911162602.D323F1F000FF@smtp.kernel.org/
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
isl29501_register_write() was returning a u32 instead of an int.
Since the function returns negative error codes (such as -ERANGE or
return values from i2c_smbus_write_byte_data()), returning an unsigned
integer type prevents callers from correctly checking for negative error
conditions.
Fix this by changing the function return type from u32 to int.
This was found through manual code review.
Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
