kernel/git/stable/linux-stable.git/drivers/usb, branch master

Merge tag 'tty-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2026-10-03T15:59:37Z

Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 7.3-rc6. Nothing major here, just lots of small fixes for reported issues, some of them very long-standing: - tty hangup fixes that have been there since the BKL days and kept tripping people up over time. - vt selection bugfix - other vt bugfixes (memory leaks and screen update fixes) - n_gsm bugfix - qcom-geni serial driver bugfix - 8250 serial driver bugfixes - other tiny serial driver fixes All of these have been in linux-next, the last few only a few days but testing here seems solid (this pull request was generated on that tree)" * tag 'tty-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) tty: add missing driver flag kernel-doc colon vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection() vt: skip screen update for DEC alignment test on backgroup consoles vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF serial: sc16is7xx: reduce TX refill rate with half-FIFO trigger serial: sc16is7xx: refill TX FIFO below trigger using fresh TXLVL serial: tegra: don't clear the Tx FIFO on an Rx-only reset serial: sc16is7xx: fix TX gap caused by kfifo circular buffer wrap-around tty: fix saved termios reset race tty: serial: mpc52xx_uart: move static declarations up. tty: serial: max3100: shut down timer before freeing port tty: add break_wait kernel-doc serial: qcom-geni: keep registered console runtime active serial: qcom-geni: Fix unbalanced runtime PM resume for no_console_suspend serial: qcom-geni: avoid unused-function warning tty: serial: qcom_geni_serial: Keep console RX functional after deep idle soc: qcom: geni-se: Correct QUP Core ICC vote constants serial: 8250_bcm7271: fix use-after-free in brcmuart_remove() serial: vt8500: Fix clock reference leak in vt8500_serial_probe() kgdboc: Fix tty driver reference leak in configure_kgdboc() ...

tty: fix saved termios reset race

2026-10-01T09:05:17Z

Resetting saved termios state on device registration is needed where a minor number can be reused for an entirely different device and where the old settings may prevent the port from even being opened (e.g. when CLOCAL is not set). Not all TTY drivers guarantee that the minor number is no longer in use when registering devices however, something which can lead to a use-after-free when closing a TTY (and saving its termios) races with re-registration. Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved termios state is reset on registration and only set it for drivers that make sure that the minor number is no longer in use. Fixes: 93857edd9829 ("tty: reset termios state on device registration") Reported-by: Chengfeng Ye Link: https://lore.kernel.org/20260926184154.3017929-1-nicoyip.dev@gmail.com Cc: stable@kernel.org # 4.12 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260930131845.1809256-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: serial: mpc52xx_uart: move static declarations up.

2026-10-01T09:04:53Z

Avoid a compilation error so that they're not used before being declared. Fixes: 4d105880666a ("tty: serial: mpc52xx_uart: add bounds check for psc_num array index") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202609260356.tJWbd1WU-lkp@intel.com/ Signed-off-by: Rosen Penev Link: https://patch.msgid.link/20260927203501.14105-1-rosenp@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: fix IRQ storm on invalid event buffer count

2026-10-01T08:22:53Z

When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") returns IRQ_NONE without writing back GEVNTCOUNT. Since the DWC3 interrupt is level-triggered, the uncleared IRQ source keeps the line asserted, causing a tight IRQ storm that accumulates 99,900 unhandled interrupts and triggers spurious.c:184 BUG -> kernel panic. The resulting call stack: __report_bad_irq+0xac/0xc8 note_interrupt+0x340/0x468 handle_irq_event+0xac/0xc0 handle_fasteoi_irq+0x120/0x228 gic_handle_irq+0x68/0x108 ... kernel BUG at kernel/irq/spurious.c:184 To reproduce, write a bogus value exceeding the event buffer length directly to the GEVNTCOUNT register: devmem 4 0x1004 Write the bogus count back to GEVNTCOUNT to clear the IRQ source, consistent with the stale event clearing pattern in dwc3_event_buffers_setup(), and schedule error recovery to reinitialize the controller. Fixes: 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") Cc: stable Suggested-by: Thinh Nguyen Signed-off-by: Jiazi Liu Link: https://patch.msgid.link/20260915110637.17658-1-jiazi.liu1984@gmail.com Acked-by: Thinh Nguyen Signed-off-by: Greg Kroah-Hartman

Revert "usb: dwc3: gadget: fix IRQ storm on invalid event buffer count"

2026-10-01T08:16:44Z

This reverts commit a107edec57659c5a1a2f016311b944af58c904c9. It was incorrectly applied, and was 2 versions old. The "correct" one will be added instead afterward... Cc: stable Cc: Jiazi Liu Reported-by: Thinh Nguyen Fixes: a107edec5765 ("usb: dwc3: gadget: fix IRQ storm on invalid event buffer count") Signed-off-by: Greg Kroah-Hartman

USB: gadget: dummy-hcd: Fix wait for outstanding request completions

2026-10-01T05:16:02Z

The dummy-hcd driver emulates synchronize_irq() by waiting until its private callback_usage counter drops to 0 (with the private lock not held). This counter is incremented whenever a gadget driver callback occurs (which requires the private lock to be dropped), but not when a request completion handler is called. This is an oversight. Request completion is triggered by timer interrupts (emulating device IRQs in a real UDC), and the interrupt handlers are supposed to have completed when the synchronize_irq() emulation routine returns -- they aren't supposed to be in the middle of a completion callback. If this happens it can lead to a gadget driver's unbind routine running before all outstanding request completions have finished, maybe even allowing the gadget driver's module to be unloaded while a completion handler is still running. Fix the oversight by incrementing the callback_usage value across request completion callbacks. Link: https://lore.kernel.org/linux-usb/7a87e293-633c-4100-aa8d-91560ba5e5c5@rowland.harvard.edu/ Fixes: 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change") Tested-by: Minseo Kim Signed-off-by: Alan Stern Cc: stable Link: https://patch.msgid.link/f23b9e1a-f110-441a-a1d8-95f442ec09d5@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: typec: port-mapper: Only match USB4 port if host interface is available

2026-10-01T05:14:19Z

typec_port_match() adds a component match for the USB4 port whenever a USB 3.x port that shares the _PLD with the Type-C connector has the "usb4-host-interface" property, regardless of whether a USB4 port can ever be registered for it. The component framework binds the aggregate device only once every match has found its component, so if the USB4 port never shows up, the USB 2.0 and USB 3.x ports are not linked to the connector either: the "connector" symlinks are never created and USB devices enumerated on those ports are never linked with the Type-C partner. This happens in at least two cases: 1. CONFIG_USB4 is not reachable from the Type-C core, i.e. CONFIG_USB4=n, or CONFIG_USB4=m with CONFIG_TYPEC=y as in the x86_64 gki_defconfig. usb4_usb3_port_match() is then a stub that always returns false. 2. The firmware references a USB4 host interface that is disabled. For example, on Intel Alder Lake-N (ChromeOS Nissa) the TCSS xHCI USB3 ports (SS01-SS04) reference TDM0/TDM1, whose _STA returns 0 because the SoC has no integrated Thunderbolt/USB4 and the DMA controllers are disabled in TCSS DEVEN. No PCI device is enumerated for them. Only add the USB4 component match if CONFIG_USB4 is reachable and the referenced host interface is available and has been enumerated as a device. The latter mirrors the check in usb_acpi_add_usb4_devlink(), see commit 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links"). Fixes: 4fd7a1f0f7f2 ("usb: typec: Connect Type-C port with associated USB4 port") Cc: stable Signed-off-by: Marek Maslanka Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260925131650.3777399-1-mmaslanka@google.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe

2026-10-01T05:13:53Z

The Cadence USBSS controller is a two-function PCI device. The first probed function allocates the driver data and stores it with pci_set_drvdata(), while the second function reuses it via pci_get_drvdata() when pci_is_enabled() reports that the first function has already been probed. When the second function is probed while the first one has been enabled but has not yet set its driver data, pci_get_drvdata() returns NULL, and the subsequent wrap->devfn assignment dereferences a NULL pointer and crashes the kernel. logs: Call trace: cdns3_pci_probe+0xa4/0x300 local_pci_probe+0x44/0xa8 pci_call_probe+0x54/0x158 pci_device_probe+0x84/0x100 really_probe+0x184/0x3d0 __driver_probe_device+0x80/0x178 driver_probe_device+0x44/0xe8 __driver_attach+0xec/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x28/0x38 bus_add_driver+0x110/0x238 driver_register+0x64/0x128 __pci_register_driver+0x50/0x60 cdns3_pci_driver_init+0x28/0x38 do_one_initcall+0x5c/0x280 do_initcalls+0x104/0x1d8 kernel_init_freeable+0x140/0x218 kernel_init+0x28/0x1f8 ret_from_fork+0x10/0x20 Return -EPROBE_DEFER in this case so that probing is retried after the first function has completed its probe. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable Signed-off-by: Jie Deng Acked-by: Peter Chen Link: https://patch.msgid.link/20260810023626.70669-1-dengjie03@kylinos.cn Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: fix IRQ storm on invalid event buffer count

2026-10-01T05:13:36Z

When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") returns IRQ_NONE without writing back GEVNTCOUNT. Since the DWC3 interrupt is level-triggered, the uncleared IRQ source keeps the line asserted, causing a tight IRQ storm that accumulates 99,900 unhandled interrupts and triggers spurious.c:184 BUG -> kernel panic. The resulting call stack: __report_bad_irq+0xac/0xc8 note_interrupt+0x340/0x468 handle_irq_event+0xac/0xc0 handle_fasteoi_irq+0x120/0x228 gic_handle_irq+0x68/0x108 ... kernel BUG at kernel/irq/spurious.c:184 To reproduce, write a bogus value exceeding the event buffer length directly to the GEVNTCOUNT register: devmem 4 0x1004 Write the bogus count back to GEVNTCOUNT to clear the IRQ source, consistent with the stale event clearing pattern in dwc3_event_buffers_setup(), and schedule error recovery to reinitialize the controller. Fixes: 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") Cc: stable Co-developed-by: Thinh Nguyen Signed-off-by: Thinh Nguyen Signed-off-by: Jiazi Liu Suggested-by: Thinh Nguyen Link: https://patch.msgid.link/20260907073756.22329-1-jiazi.liu1984@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Get the connector fwnode based on reg value

2026-10-01T05:13:01Z

ucsi_find_fwnode() currently maps UCSI connectors to Device tree connector nodes based on the order in which connector child nodes are described in DT. This can fail because the ordering of child nodes isn't guaranteed in Device-tree. For example, DTB may contain connector@1 before connector@0, causing connector numbers to be associated with the wrong fwnode. As a result, role switch and Type-C notifications can be delivered to the wrong remote endpoints. Fix this by using the "reg" property of each connector to match its corresponding fwnode. While at it, if the reg property isn't present, then fall back to the old method. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: stable Signed-off-by: Prashanth K Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260916042808.2879079-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman