Unnamed repository; edit this file 'description' to name the repository. http://git-test.landau.one/pub/scm/linux/kernel/git/stable/linux-stable.git/atom/drivers/iio/buffer?h=master 2026-09-11T09:52:17Z 2026-09-11T09:52:17Z Greg Kroah-Hartman gregkh@linuxfoundation.org 2026-09-11T09:52:17Z urn:sha1:049094c8878062cebd93c8c22d2c13b1d6804e99 Jonathan writes: IIO: 1st set of fixes for the 7.3 cycle. A couple of core fixes, the rest usual mix of driver issues that surfaced from merge window until now. core - buffer: Ensure that when using the iio_push_to_buffers_with_ts_unaligned() that the full buffer is zeroed. - trigger: Cancel reenable_work() before freeing the trigger that might be re-enabled. dma-buffer - Fix wrong sizing for a mapped sg_list. If an IOMMU was using a fused entry the mapping might walk off the end. adi,ade9000 - Wait for power up before requesting interrupts. - Fix overlap in scan index for current and voltage channels. - Ensure Phase C dip event included in IRQ1 handler. adi,adf4377 - Initialize all of a clk_init_data. adi,adis* - Ensure debugfs reads are finished before unbind. adi,axi-adc - Initialize mutex. adi,admv1013 - Ensure mutex is intialized before notifier that might use it is registered. - Fix wrong channel field used for read_raw. allwinner,sun4i - Drop a pm_runtime_put() when there was no get. - Ensure correct cleanup on driver probe fail due to any issues with the thermal zone. aspeed,adc, - Don't eat reset deassert errors. awinic,aw96103 - Make sure firmware length is validated rather than blindly trusting it. bosch,bmp280 - Fix out of bounds lookup of sampling frequency due to indexing based on elements in matrix rather than just the correct dimension. invensense,timestamp library - Ensure time estimate doesn't invert wrt to current time in a corner case occasionally seen. kionix,kx022a - Off by one in array boundary check. - Close a memory leak and state corruption in error path. maxim,max1363 - Sign extend bipolar values to ensure correct reporting to userspace. maxim,max30102 - Fix NULL dereference by checking there is data in the FIFO before trying to do anything with it. microchip,mcp47a1 - Ensure highest possible value actually settable. pulsed-light,lidar-lite - Don't leak the IIO device registration if runtime pm setup fails particularly as it was being freed. rockchip,saradc - Fix wrong fallback compatible for rv1106 that lead to trying to use too many channels (correct support will follow next merge window) rohm,bd79124 - Correct limit used for rising alarms. - Fix which registers related to limits are used in initialization. - Apply GPIO mask to allow subset of GPIOs to be toggled. - Add missing regmap error handling in a few places. - Ensures scale is read only. rohm,bm1390 - Don't silently eat a data read error. rohm,bu27034 - Don't silently eat error when reading gain. - Ensure we infinite delay doesn't happen on error. semtech,sx9324 - Fix wrong proximity channel resolution. sharp,gp2ap020a00f - Make sure to drain irq_work in remove path. st,vl5310x - Ensure direct mode is claimed for read_raw avoiding corruption of buffered accesses. vishay,vcnl3020 - Use write bits for ISR mask and ensure right event reported. vti,sca3000 - Fix up a condition check for the frequency divider. xilinx,xadc - Swap registration of cleanup of work with that of irq to ensure that no irqs can cause work that has been freed to be queued. x-powers,axp288 - Add bias override quirk for Haier HV103H. Fix because we used to always override then moved to trusting the firmware setup - which fixed some boards, but broke others. * tag 'iio-fixes-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits) iio: proximity: vcnl3020: fix ISR bitmask check in IRQ handler iio: proximity: vl53l0x-i2c: claim direct mode for raw reads iio: dac: mcp47a1: Allow full-scale output iio: accel: kionix-kx022a: Prevent memory leak and fix state iio: light: rohm-bu27034: Fix infinite delay on error iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure iio: adc: sun4i-gpadc-iio: drop underflowing pm_runtime_put() calls iio: adc: axp288: Add TS bias override for Haier HV103H dt-bindings: iio: adc: rockchip-saradc: Fix RV1106 compatible dt-bindings: iio: adc: rockchip-saradc: Group single-entries into an enum list iio: inv_sensors: fix estimated value larger than interrupt timestamp iio: adc: aspeed: propagate reset deassert errors iio: buffer-dmaengine: fix sg entry iteration when building dma_vecs iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure iio: trigger: cancel reenable_work before freeing trigger iio: frequency: admv1013: fix wrong channel field used in admv1013_read_raw() iio: accel: sca3000: fix frequency divider condition check iio: admv1013: initialize callback mutex before registering notifier iio: gyro: adis16136: fix unprotected debugfs reads iio: imu: adis16400: fix unprotected debugfs reads ... 2026-09-07T01:24:53Z Donggeun Yoo donggeunyoo.kernel@gmail.com 2026-09-01T15:21:26Z urn:sha1:e24328974a88aa8541e94e8bb8dfa2ade1b3c45d vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> 2026-09-05T04:37:00Z Kees Cook kees+treewide@kernel.org 2026-09-02T22:31:14Z urn:sha1:3a2c4d55e32ad65efebdb6de44eef3bfa08bb49d This is another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci This catches both the set of kmalloc() uses added since the first kmalloc_obj() conversions in v7.0 and adds a large group missed in the first pass due to Coccinelle not interacting well with the cleanup.h scoped_...() family of macros[1]. I worked around this with spatch's "--macro-file" argument to a file with all the scoped_...() macros mapped to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control flow indicator I could find. Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc, riscv, and s390 with no new warnings. Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1] Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2] Signed-off-by: Kees Cook <kees+treewide@kernel.org>